Toggle Nav

Authentic Restoration Parts For Your Porsche ... Since 1957

  • Order Online or Call:
  • East Coast:(800) ­342 ­1414
  • West Coast:(800) ­438 ­8119
  • International: (440) 869 9890
Search
Advanced Search
  • Compare Products
Menu
Account
  • Home
  • Search results for: 'bars+and+lounges+that+allow+minors+in+nova'

Search results for: 'bars+and+lounges+that+allow+minors+in+nova'

View as Grid List

Items 1-80 of 2878

Page
per page
Set Ascending Direction
  1. 901-343-765-00 Block-Off Cap for Anti-Roll Bar Fitting (For those cars that don't have a front sway bar). Fits Early 911 912
    901-343-765-00 Block-Off Cap for Anti-Roll Bar Fitting (For those cars that don't have a front sway bar). Fits Early 911 912
    $73.95
    Add to Wish List
  2. 901-505-INS Insulation for Center License Plate Panel. Fits 911 912 1965-1973
    901-505-INS Insulation for Center License Plate Panel. Fits 911 912 1965-1973
    $50.00
    Add to Wish List
  3. T55-110-229 Distributor Drive Tool Allows for the removal and installation of the distributor drive while the engine is assembled.
    T55-110-229 Distributor Drive Tool Allows for the removal and installation of the distributor drive while the engine is assembled.
    $125.00
    Add to Wish List
  4. 901-333-793-04 Rear Anti-roll Bar Bushing for 911, 912 and 914 with 16mm bar
    901-333-793-04 Rear Anti-roll Bar Bushing for 911, 912 and 914 with 16mm bar
    $37.63
    Add to Wish List
  5. NLA-615-100-00 Power Resistor for clocks and relays. Allows for 6V clock or relay to operate on 12 volts. For 356
    NLA-615-100-00 Power Resistor for clocks and relays. Allows for 6V clock or relay to operate on 12 volts. For 356
    $7.85
    Add to Wish List
  6. 550-41-608-01 Front Anti Roll Sway Bar Bushing For 356 Pre A and 550 Spyder with 12mm Bar 554160801
    550-41-608-01 Front Anti Roll Sway Bar Bushing For 356 Pre A and 550 Spyder with 12mm Bar 554160801
    $12.00
    Add to Wish List
  7. 644-41-605 Sway Bar Mount Bracket, Front for 356A, 356B, and 356C
    644-41-605 Sway Bar Mount Bracket, Front for 356A, 356B, and 356C
    $65.00
    Add to Wish List
  8. 911-343-881-00 Anti-Roll Sway Bar and End Link Bushing Fits 911 1984-1989
    911-343-881-00 Anti-Roll Sway Bar and End Link Bushing Fits 911 1984-1989
    $22.98
    Add to Wish List
  9. 901-333-753-01 Rear Anti-Roll Bar Mounting Bracket Fits 911, 1965-1977 and 914
    901-333-753-01 Rear Anti-Roll Bar Mounting Bracket Fits 911, 1965-1977 and 914
    $17.78
    Add to Wish List
  10. 901-559-210-29 Hood Crest, Orange-Bar Type for 911 and 912 through 1975.
    901-559-210-29 Hood Crest, Orange-Bar Type for 911 and 912 through 1975.
    $332.25
    Add to Wish List
  11. 996-343-070-04 Anti-Roll Sway Bar Drop Link Right for Boxster and 996
    996-343-070-04 Anti-Roll Sway Bar Drop Link Right for Boxster and 996
    $48.00
    Add to Wish List
  12. 901-343-782-00 Front Anti-Roll Bar Drop Link Upper Bushing 2 required, Fits 911, 1965-1983 and 914
    901-343-782-00 Front Anti-Roll Bar Drop Link Upper Bushing 2 required, Fits 911, 1965-1983 and 914
    $6.27
    Add to Wish List
  13. NLA-612-801-00 Three Connection Tie Bar for Fuse Box. Fits 356, 911 and 912
    NLA-612-801-00 Three Connection Tie Bar for Fuse Box. Fits 356, 911 and 912
    $6.90
    Add to Wish List
  14. 644-398-101-25 Heavy Duty Long 25mm Rear Torsion Bars For 356A 356B
    644-398-101-25 Heavy Duty Long 25mm Rear Torsion Bars For 356A 356B
    $500.00
    Add to Wish List
  15. SIC-565-091-40 Targa Bar Seal, Front of bar. Fits 911 912 1967-1969
    SIC-565-091-40 Targa Bar Seal, Front of bar. Fits 911 912 1967-1969
    $250.00
    Add to Wish List
  16. 477-411-313-N Anti-Roll Bar Bushing 18mm for 924, 911 964 and 993 477411313n
    477-411-313-N Anti-Roll Bar Bushing 18mm for 924, 911 964 and 993 477411313n
    $61.57
    Add to Wish List
  17. 996-343-069-04 Anti Roll Sway Bar Drop Link Left for Boxster and 996 996.343.069.04
    996-343-069-04 Anti Roll Sway Bar Drop Link Left for Boxster and 996 996.343.069.04
    $48.00
    Add to Wish List
  18. SIC-559-210-20 Hood Crest, With Orange Bars, Complete With Seal and Nuts. Fits 911 912 1966-1975
    SIC-559-210-20 Hood Crest, With Orange Bars, Complete With Seal and Nuts. Fits 911 912 1966-1975
    $67.50
    Add to Wish List
  19. 944-126-021-03 Adjustment bar for alternator and A/C compressor on 924S, 944, 944S, 944S2, 944 Turbo and 968 models.
    944-126-021-03 Adjustment bar for alternator and A/C compressor on 924S, 944, 944S, 944S2, 944 Turbo and 968 models.
    $109.56
    Add to Wish List
  20. 901-343-763-00 Anti-Roll Bar Guide Plate Fits 911 1965-1973 and 914 with front anti-roll bar.
    901-343-763-00 Anti-Roll Bar Guide Plate Fits 911 1965-1973 and 914 with front anti-roll bar.
    $32.35
    Add to Wish List
  21. SIC-504-079-00 Torsion Bar Access Hole Cover Set with Seal and Mount.Fits 911 912 1965-1985
    SIC-504-079-00 Torsion Bar Access Hole Cover Set with Seal and Mount.Fits 911 912 1965-1985
    $12.00
    Add to Wish List
  22. SIC-333-753-01 Rear Anti-Roll Bar Mounting Bracket, Fits 911 912 1965-1977 and 914
    SIC-333-753-01 Rear Anti-Roll Bar Mounting Bracket, Fits 911 912 1965-1977 and 914
    $8.00
    Add to Wish List
  23. 901-343-076-03 Front Anti-roll Bar Drop Link 2 req'd. Fits 1965-1973, 930 1975-1977 and 914
    901-343-076-03 Front Anti-roll Bar Drop Link 2 req'd. Fits 1965-1973, 930 1975-1977 and 914
    $112.75
    Add to Wish List
  24. 644-41-103 Front Torsion Bar Bushing
    644-41-103 Front Torsion Bar Bushing
    $166.59
    Add to Wish List
  25. 539-06-605 Fuel Line Grommet in Engine Sheetmetal for 356B and 356C
    539-06-605 Fuel Line Grommet in Engine Sheetmetal for 356B and 356C
    $2.45
    Add to Wish List
  26. SIC-343-754-01 Anti-Roll Sway Bar Bushing Mounting Plate for 1965-73 911 and 1976-1977 911 Turbo
    SIC-343-754-01 Anti-Roll Sway Bar Bushing Mounting Plate for 1965-73 911 and 1976-1977 911 Turbo
    $25.00
    Add to Wish List
  27. 914-531-827-10 Roll Bar Rail Left
    914-531-827-10 Roll Bar Rail Left
    $37.00
    Add to Wish List
  28. NLA-23-011 Accelerator Pedal with Hinge and Spring. Fits all 356A, 356B and 356C. Exclusively Made In Germany for Stoddard
    NLA-23-011 Accelerator Pedal with Hinge and Spring. Fits all 356A, 356B and 356C. Exclusively Made In Germany for Stoddard
    $110.25
    Add to Wish List
  29. 914-531-828-10 Roll Bar Rail Right
    914-531-828-10 Roll Bar Rail Right
    $37.00
    Add to Wish List
  30. 914-501-532-71 Sway Bar Reinforcement Plate
    914-501-532-71 Sway Bar Reinforcement Plate
    $15.00
    Add to Wish List
  31. NLA-347-736-00 Steel Cap in Horn Ring for 356 Pre-A and 356 A
    NLA-347-736-00 Steel Cap in Horn Ring for 356 Pre-A and 356 A
    $67.35
    Add to Wish List
  32. 951-343-795-01 Front Sway Bar Link Rubber Mounting for 944 1985-91 and 968 1992-95
    951-343-795-01 Front Sway Bar Link Rubber Mounting for 944 1985-91 and 968 1992-95
    $7.57
    Add to Wish List
  33. SIC-333-110-00 Rubber Bushings, Set of Four, For Rear Torsion Bars. Factory Stock Durometer Hardness Fits 911 1969-89.
    SIC-333-110-00 Rubber Bushings, Set of Four, For Rear Torsion Bars. Factory Stock Durometer Hardness Fits 911 1969-89.
    $200.00
    Add to Wish List
  34. 900-029-003-40 Wing nut, M8, in plastic for Porsche 911 and 914-6
    900-029-003-40 Wing nut, M8, in plastic for Porsche 911 and 914-6
    $7.19
    Add to Wish List
  35. 901-343-783-00 Anti-Roll Bar Drop Link Bushing Fits 911 65-73 and 914
    901-343-783-00 Anti-Roll Bar Drop Link Bushing Fits 911 65-73 and 914
    $15.22
    Add to Wish List
  36. 644-20-117 Cross Shaft Bushing in Case, fits, 644, 716, and 741 transmissions, 356A, 356B, 356C
    644-20-117 Cross Shaft Bushing in Case, fits, 644, 716, and 741 transmissions, 356A, 356B, 356C
    $11.20
    Add to Wish List
  37. SIC-343-783-00 Sway Bar Link Rubber Bushing--4 required, Fits 911, 1965-73
    SIC-343-783-00 Sway Bar Link Rubber Bushing--4 required, Fits 911, 1965-73
    $6.00
    Add to Wish List
  38. 901-343-792-02 Bushing for 16mm Front Anti-Roll Bar 2 req'd. Fits 1965-1973 and 73-76 914.
    901-343-792-02 Bushing for 16mm Front Anti-Roll Bar 2 req'd. Fits 1965-1973 and 73-76 914.
    $24.39
    Add to Wish List
  39. 644-41-606 Clip, Sway Bar Locator, 2 required per car, Fits all 356.
    644-41-606 Clip, Sway Bar Locator, 2 required per car, Fits all 356.
    $9.40
    Add to Wish List
  40. SIC-404-654-00 15 Quart Oil Drain Pan and Container. Made in USA
    SIC-404-654-00 15 Quart Oil Drain Pan and Container. Made in USA
    $26.00
    Add to Wish List
  41. NLA-109-954-00 Stoddard ignition wire set for 356 and 912 with long, straight brown connector. Made in USA
    NLA-109-954-00 Stoddard ignition wire set for 356 and 912 with long, straight brown connector. Made in USA
    $105.00
    Add to Wish List
  42. 901-343-792-01 Anti-Roll Bar Body Mount Bushing Fits 911/912 65-69
    901-343-792-01 Anti-Roll Bar Body Mount Bushing Fits 911/912 65-69
    $19.68
    Add to Wish List
  43. SIC-341-115-02 Front Torsion Bar Adjusting Bolt
    SIC-341-115-02 Front Torsion Bar Adjusting Bolt
    $24.78
    Add to Wish List
  44. 911-343-083-00 Anti Roll Sway Bar Lever 91134308300
    911-343-083-00 Anti Roll Sway Bar Lever 91134308300
    $105.00
    Add to Wish List
  45. 0-76-3NT Recaro Seat Universal Slider, Outside bar with No Tabs
    0-76-3NT Recaro Seat Universal Slider, Outside bar with No Tabs
    $150.00
    Add to Wish List
  46. 911-501-983-00-GRV Rear Sway Bar Mount Bracket Fits 911 1978-89 930
    911-501-983-00-GRV Rear Sway Bar Mount Bracket Fits 911 1978-89 930
    $112.69
    Add to Wish List
  47. NLA-333-017-00 17.5mm Front Sport Anti-Roll Sway Bar Kit for all 356
    NLA-333-017-00 17.5mm Front Sport Anti-Roll Sway Bar Kit for all 356
    $450.00
    Add to Wish List
  48. 477-411-313-C Anti-Roll Bar Bushing 20mm for 924, 911 964 and 993
    477-411-313-C Anti-Roll Bar Bushing 20mm for 924, 911 964 and 993
    $46.44
    Add to Wish List
  49. PCG-644-412 Torsion Bar Grub Fastening Set Screw
    PCG-644-412 Torsion Bar Grub Fastening Set Screw
    $29.54
    Add to Wish List
  50. T80-750-000 Synchrometer Air Flow Meter for Carbureted and MFI Engines. Made in Germany
    T80-750-000 Synchrometer Air Flow Meter for Carbureted and MFI Engines. Made in Germany
    $70.00
    Add to Wish List
  51. 901-343-737-00 Anti-Roll Bar Drop Link Bushing Spacer Tube Fits 1965-1973 911 and 914
    901-343-737-00 Anti-Roll Bar Drop Link Bushing Spacer Tube Fits 1965-1973 911 and 914
    $8.11
    Add to Wish List
  52. 901-565-914-40 Soft Window Targa Rear Bar Seal
    901-565-914-40 Soft Window Targa Rear Bar Seal
    $426.85
    Add to Wish List
  53. 901-333-101-15 Rear Torsion Bar, Left 23mm 90133310115
    901-333-101-15 Rear Torsion Bar, Left 23mm 90133310115
    $700.00
    Add to Wish List
  54. 901-333-102-10 Rear Torsion Bar, Right 23mm 90133310210
    901-333-102-10 Rear Torsion Bar, Right 23mm 90133310210
    $700.00
    Add to Wish List
  55. 900-027-015-02 B8 8mm Lock Washer for ring gear bolts and other parts, fits 911 1965-1989, 914 sway bar.
    900-027-015-02 B8 8mm Lock Washer for ring gear bolts and other parts, fits 911 1965-1989, 914 sway bar.
    $0.25
    Add to Wish List
  56. 911-341-115-02 Front Torsion Bar Adjusting Screw Bolt
    911-341-115-02 Front Torsion Bar Adjusting Screw Bolt
    $53.10
    Add to Wish List
  57. NLA-41-609 Anti-Roll Sway Bar Bushing Kit For 356
    NLA-41-609 Anti-Roll Sway Bar Bushing Kit For 356
    $47.25
    Add to Wish List
  58. 477-837-219 Key Blank for use in all 924 models and all 944 models up to mid-1985.
    477-837-219 Key Blank for use in all 924 models and all 944 models up to mid-1985.
    $19.07
    Add to Wish List
  59. 901-501-180-20-GRV Rear Sway Bar Mount. 2 required, Fits 911, 912 1965-1971. Early style.
    901-501-180-20-GRV Rear Sway Bar Mount. 2 required, Fits 911, 912 1965-1971. Early style.
    $39.38
    Add to Wish List
  60. 901-333-701-04 15.5mm Rear Anti-Roll Bar Fits all 911 models from 1965 to 1973.
    901-333-701-04 15.5mm Rear Anti-Roll Bar Fits all 911 models from 1965 to 1973.
    $250.00
    Add to Wish List
  61. 900-053-003-00 Pinion Shaft Bearing in Intermediate Plate,for 644, 716, and 741 Transmissions. 16 Balls, Double Row.
    900-053-003-00 Pinion Shaft Bearing in Intermediate Plate,for 644, 716, and 741 Transmissions. 16 Balls, Double Row.
    $75.00
    Add to Wish List
  62. 477-411-313-M Anti-Roll Sway Bar Bushing, 21mm 477411313M
    477-411-313-M Anti-Roll Sway Bar Bushing, 21mm 477411313M
    $6.25
    Add to Wish List
  63. 644-504-079-00 Torsion Bar Cover Plate Set, with Hardware.
    644-504-079-00 Torsion Bar Cover Plate Set, with Hardware.
    $10.50
    Add to Wish List
  64. 993-343-069-83 Front Anti-Roll Bar Coupling Rod Left
    993-343-069-83 Front Anti-Roll Bar Coupling Rod Left
    $248.46
    Add to Wish List
  65. SIC-565-091-44 Front Targa Bar Seal Fits 911 1970-1973
    SIC-565-091-44 Front Targa Bar Seal Fits 911 1970-1973
    $302.00
    Add to Wish List
  66. 644-41-202-1 Torsion Bar Support, Front Fits 356 1950-65
    644-41-202-1 Torsion Bar Support, Front Fits 356 1950-65
    $145.92
    Add to Wish List
  67. PS86-003N LN Engineering Porsche 356 and 912 86mm|1720cc Nickies Cylinder and Mahle Piston Set (Slip-in case register) 57.5-60.5cc Combustion Chambers
    PS86-003N LN Engineering Porsche 356 and 912 86mm|1720cc Nickies Cylinder and Mahle Piston Set (Slip-in case register) 57.5-60.5cc Combustion Chambers
    $4,600.00
    Add to Wish List
  68. PS86-004N LN Engineering Porsche 356 and 912 86mm|1720cc Nickies Cylinder and Mahle Piston Set (Slip-in case register) 60.5-63.5cc Combustion Chambers
    PS86-004N LN Engineering Porsche 356 and 912 86mm|1720cc Nickies Cylinder and Mahle Piston Set (Slip-in case register) 60.5-63.5cc Combustion Chambers
    $4,600.00
    Add to Wish List
  69. PS86-005N LN Engineering Porsche 356 and 912 86mm|1720cc Nickies Cylinder and Mahle Piston Set (Slip-in case register) 63.5-66.5cc Combustion Chambers
    PS86-005N LN Engineering Porsche 356 and 912 86mm|1720cc Nickies Cylinder and Mahle Piston Set (Slip-in case register) 63.5-66.5cc Combustion Chambers
    $4,700.00
    Add to Wish List
  70. 901-565-091-44 Targa Top Bar Seal Fits 911 70-73
    901-565-091-44 Targa Top Bar Seal Fits 911 70-73
    $477.30
    Add to Wish List
  71. 911-559-511-00 Torsion Bar Cover Seal Fits 911 87-89
    911-559-511-00 Torsion Bar Cover Seal Fits 911 87-89
    $8.46
    Add to Wish List
  72. PS91-003N LN Engineering 356 and 912 91mm|1925cc Nickies Cylinder and Mahle Piston Set (Machine-in case & head register) 63.5-66.5cc combustion chambers
    PS91-003N LN Engineering 356 and 912 91mm|1925cc Nickies Cylinder and Mahle Piston Set (Machine-in case & head register) 63.5-66.5cc combustion chambers
    $4,600.00
    Add to Wish List
  73. 911-341-031-01 Strut or Mount for Anti-Roll Bar and Protection Plate. Fits 911 1974-1989 (non Turbo)
    911-341-031-01 Strut or Mount for Anti-Roll Bar and Protection Plate. Fits 911 1974-1989 (non Turbo)
    $66.81
    Add to Wish List
  74. 644-41-602 Bushing, to fit 15mm diameter sway bar, 6 required per car, Fits 356A, 356B, 356C.
    644-41-602 Bushing, to fit 15mm diameter sway bar, 6 required per car, Fits 356A, 356B, 356C.
    $13.95
    Add to Wish List
  75. 644-559-011-07 27mm Narrow Rocker Deco for 356B and 356C. Made in Germany.
    644-559-011-07 27mm Narrow Rocker Deco for 356B and 356C. Made in Germany.
    $95.00
    Add to Wish List
  76. 911-343-703-10 Front Anti-Roll Bar 20mm For 911 1974-
    911-343-703-10 Front Anti-Roll Bar 20mm For 911 1974-
    $129.49
    Add to Wish List
  77. 901-343-101-14 Torsion Bar, Front Left, Fits 911 1965-89
    901-343-101-14 Torsion Bar, Front Left, Fits 911 1965-89
    $895.84
    Add to Wish List
  78. PS91-001N LN Engineering Porsche 356 and 912 91mm|1925cc Nickies Cylinder and Mahle Piston Set (Machine-in case & head register) 57.5-60.5cc Combustion Chambers
    PS91-001N LN Engineering Porsche 356 and 912 91mm|1925cc Nickies Cylinder and Mahle Piston Set (Machine-in case & head register) 57.5-60.5cc Combustion Chambers
    $4,600.00
    Add to Wish List
  79. 644-41-601 Stainless Steel Sleeve for anti-roll bar shackle bushing, 2 Required per car, fits all 356
    644-41-601 Stainless Steel Sleeve for anti-roll bar shackle bushing, 2 Required per car, fits all 356
    $9.45
    Add to Wish List
  80. 901-343-754-01 Anti-Roll Bar Mounting Plate Fits 911 1965-73 930 1975-1977 and 914
    901-343-754-01 Anti-Roll Bar Mounting Plate Fits 911 1965-73 930 1975-1977 and 914
    $171.21
    Add to Wish List
View as Grid List

Items 1-80 of 2878

Page
per page
Set Ascending Direction
© 2025 Stoddard NLA LLC. All Rights Reserved.