Toggle Nav

Authentic Restoration Parts For Your Porsche ... Since 1957

  • Order Online or Call:
  • East Coast:(800) ­342 ­1414
  • West Coast:(800) ­438 ­8119
  • International: (440) 869 9890
Search
Advanced Search
  • Compare Products
Menu
Account

Crankshaft, Flywheel and Bearings

Crankshaft, Flywheel and Bearings
View as Grid List

64 Items

per page
Set Descending Direction
  1. 930-102-206-00 Flywheel to Crank Bolt, 9 req'd. Fits 911 930 964 1978-1994.
    930-102-206-00 Flywheel to Crank Bolt, 9 req'd. Fits 911 930 964 1978-1994.
    $2.75
    Add to Wish List
  2. 901-102-162-04 Lockplate For Flywheel To Crank Bolts. Fits 1965-1977 911 and 914-6
    901-102-162-04 Lockplate For Flywheel To Crank Bolts. Fits 1965-1977 911 and 914-6
    $83.58
    Add to Wish List
  3. 900-067-090-02 Ring Gear Bolts fits 911 1970-89
    900-067-090-02 Ring Gear Bolts fits 911 1970-89
    $1.75
    Add to Wish List
  4. SIC-116-239-04 Starter Flywheel Ring Gear for 911 1970-1986
    SIC-116-239-04 Starter Flywheel Ring Gear for 911 1970-1986
    $162.00
    Add to Wish List
  5. 999-707-285-41 O-Ring 51x 4.5mm For Main Bearing End of Crankshaft
    999-707-285-41 O-Ring 51x 4.5mm For Main Bearing End of Crankshaft
    $14.74
    Add to Wish List
  6. 964-103-176-05 Connecting Rod Bolt 96410317605
    964-103-176-05 Connecting Rod Bolt 96410317605
    $17.50
    Add to Wish List
  7. 914-103-171-01 Connecting Rod Bolt for 911 2.4 2.7 3.0 up to 1972-1983
    914-103-171-01 Connecting Rod Bolt for 911 2.4 2.7 3.0 up to 1972-1983
    $41.20
    Add to Wish List
  8. 911-102-201-12 Flywheel Fits 911 1970-77
    911-102-201-12 Flywheel Fits 911 1970-77
    $798.84
    Add to Wish List
  9. 900-174-068-40 O-Ring / Seal
    900-174-068-40 O-Ring / Seal
    $3.76
    Add to Wish List
  10. 999-113-286-41 Rear Main Shaft Seal
    999-113-286-41 Rear Main Shaft Seal
    $32.68
    Add to Wish List
  11. 901-102-111-02 Crankshaft Timing Gear, Size Zero
    901-102-111-02 Crankshaft Timing Gear, Size Zero
    $610.50
    Add to Wish List
  12. 901-102-911-00 Oil Seal For Crankshaft
    901-102-911-00 Oil Seal For Crankshaft
    $62.27
    Add to Wish List
  13. PCG-102-110-01 Distributor Drive Gear for 356 and 912, 911 1965-77, 914-6, 914-4, and 912E
    PCG-102-110-01 Distributor Drive Gear for 356 and 912, 911 1965-77, 914-6, 914-4, and 912E
    $182.78
    Add to Wish List
  14. SIC-113-057-52 Viton Crankshaft Seal, Flywheel End, Fits 911 1965-1977
    SIC-113-057-52 Viton Crankshaft Seal, Flywheel End, Fits 911 1965-1977
    $31.30
    Add to Wish List
  15. T55-216-00 Oil Seal Crank Installation Fits 911 1965-77
    T55-216-00 Oil Seal Crank Installation Fits 911 1965-77
    $252.25
    Add to Wish List
  16. 911-101-133-52 Main Bearing Shell Half 91110113352
    911-101-133-52 Main Bearing Shell Half 91110113352
    $57.13
    Add to Wish List
  17. 911-101-902-50 Engine Main Bearing Set - .25 mm (1st) ﾠ 1975-1977 Porsche 911 2.7L / 911 Turbo Carrera 3.0L / 930 3.0L 6 Bolt Crankshaft
    911-101-902-50 Engine Main Bearing Set - .25 mm (1st) ﾠ 1975-1977 Porsche 911 2.7L / 911 Turbo Carrera 3.0L / 930 3.0L 6 Bolt Crankshaft
    $459.49
    Add to Wish List
  18. 900-741-136-03 Socket Head Bolt - Flywheel Ring Gear to Clutch Pressure Plate (8 X 80 mm)
    900-741-136-03 Socket Head Bolt - Flywheel Ring Gear to Clutch Pressure Plate (8 X 80 mm)
    $1.75
    Add to Wish List
  19. 901-102-111-20 Crankshaft Timing Gear 90110211120
    901-102-111-20 Crankshaft Timing Gear 90110211120
    $380.00
    Add to Wish List
  20. 930-102-202-01 240mm Flywheel For  PORSCHE 911 / EARLY 930 TURBO With 930 TRANSMISSION
    930-102-202-01 240mm Flywheel For  PORSCHE 911 / EARLY 930 TURBO With 930 TRANSMISSION
    $462.50
    Add to Wish List
  21. 930-116-230-03 Flywheel Ring Gear 1978-1989 Porsche 930 Turbo / 911 Turbo - 4 Speed 93011623003
    930-116-230-03 Flywheel Ring Gear 1978-1989 Porsche 930 Turbo / 911 Turbo - 4 Speed 93011623003
    $237.50
    Add to Wish List
  22. 901-103-131-02 Wrist Pin Bushing For 356 911 912 up to 1989
    901-103-131-02 Wrist Pin Bushing For 356 911 912 up to 1989
    $31.20
    Add to Wish List
  23. 911-102-171-00 Flywheel to crank bolts, 6 req'd. Fits 1970-1977 2.2 through 2.7 liter 911s.
    911-102-171-00 Flywheel to crank bolts, 6 req'd. Fits 1970-1977 2.2 through 2.7 liter 911s.
    $13.25
    Add to Wish List
  24. 930-102-033-03 Flywheel, G50 Fits 911 964 1987-1994. 93010203303
    930-102-033-03 Flywheel, G50 Fits 911 964 1987-1994. 93010203303
    $462.50
    Add to Wish List
  25. 930-102-215-00 Flywheel. Fits 1980-1983.
    930-102-215-00 Flywheel. Fits 1980-1983.
    $250.00
    Add to Wish List
  26. SIC-102-204-03 Flywheel for 911 911SC 1978-1979
    SIC-102-204-03 Flywheel for 911 911SC 1978-1979
    $400.00
    Add to Wish List
  27. SIC-102-201-12 Flywheel for Fits 911 1970-1977
    SIC-102-201-12 Flywheel for Fits 911 1970-1977
    $350.00
    Add to Wish List
  28. SIC-102-042-00 Complete Pilot Bushing, fits 911 1980-1989. From Eng #629 2281 (49 States) or Eng #659 1576 (California)
    SIC-102-042-00 Complete Pilot Bushing, fits 911 1980-1989. From Eng #629 2281 (49 States) or Eng #659 1576 (California)
    $32.50
    Add to Wish List
  29. N-012-241-8 10mm x 15 mm Yellow Cad Steel Spring Washer Fits 911 1974-95 930 924 944 968 928
    N-012-241-8 10mm x 15 mm Yellow Cad Steel Spring Washer Fits 911 1974-95 930 924 944 968 928
    $1.10
    Add to Wish List
  30. 900-027-015-02 B8 8mm Lock Washer for ring gear bolts and other parts, fits 911 1965-1989, 914 sway bar.
    900-027-015-02 B8 8mm Lock Washer for ring gear bolts and other parts, fits 911 1965-1989, 914 sway bar.
    $0.25
    Add to Wish List
  31. 999-113-057-52 Crankshaft Seal, Flywheel End. Fits 911 1965-1977.
    999-113-057-52 Crankshaft Seal, Flywheel End. Fits 911 1965-1977.
    $12.40
    Add to Wish List
  32. 999-113-290-41 Crankshaft seal, pulley end. Fits 911 964 993 996 1965-2005.
    999-113-290-41 Crankshaft seal, pulley end. Fits 911 964 993 996 1965-2005.
    $43.78
    Add to Wish List
  33. 993-103-174-02 Rod nuts, 12 req'd. Fits 911 964 993 1984-1998, and 1978-1988 (Turbo)
    993-103-174-02 Rod nuts, 12 req'd. Fits 911 964 993 1984-1998, and 1978-1988 (Turbo)
    $3.30
    Add to Wish List
  34. SIC-103-131-01 Solid Piston Wrist Pin Bushing Fits 356 911 1965-89 930 912 914
    SIC-103-131-01 Solid Piston Wrist Pin Bushing Fits 356 911 1965-89 930 912 914
    $15.15
    Add to Wish List
  35. 911-103-132-00 Split Piston Wrist Pin Bushing Fits 911 1965-89 912 930 914
    911-103-132-00 Split Piston Wrist Pin Bushing Fits 911 1965-89 912 930 914
    $20.80
    Add to Wish List
  36. 911-101-901-00 Main bearing set, Glyco Alloy, Standard Size. Fits 911 1965-1975.5 through Engine #6450388.
    911-101-901-00 Main bearing set, Glyco Alloy, Standard Size. Fits 911 1965-1975.5 through Engine #6450388.
    $180.00
    Add to Wish List
  37. SIC-101-901-00 Main Bearing Set, Fits 911 1965-75.5 through Engine #6450388.. Standard Size
    SIC-101-901-00 Main Bearing Set, Fits 911 1965-75.5 through Engine #6450388.. Standard Size
    $200.00
    Add to Wish List
  38. SIC-101-901-50 Main Bearing Set, .25mm under. Fits 911 1965-75.5 through Engine #6450388
    SIC-101-901-50 Main Bearing Set, .25mm under. Fits 911 1965-75.5 through Engine #6450388
    $345.00
    Add to Wish List
  39. 964-101-901-00 Main Bearing Set, standard. Fits 911 964 993 1978-1998.
    964-101-901-00 Main Bearing Set, standard. Fits 911 964 993 1978-1998.
    $307.00
    Add to Wish List
  40. 964-101-901-51 Main Bearing Set 0.25 OVERSIZE INNER PORSCHE 911 / 964 / 993 / 996 TURBO
    964-101-901-51 Main Bearing Set 0.25 OVERSIZE INNER PORSCHE 911 / 964 / 993 / 996 TURBO
    $375.00
    Add to Wish List
  41. 911-101-901-55 Main Bearing Set, 50mm under Fits 911 1965-75.5 through Engine #6450388. 91110190155
    911-101-901-55 Main Bearing Set, 50mm under Fits 911 1965-75.5 through Engine #6450388. 91110190155
    $331.23
    Add to Wish List
  42. 901-101-138-03 Main Bearing #8 Standard Case / Standard Crank. Fits 911, 914-6, 930 1965-1977
    901-101-138-03 Main Bearing #8 Standard Case / Standard Crank. Fits 911, 914-6, 930 1965-1977
    $296.89
    Add to Wish List
  43. 964-101-138-01 #8 Main bearing, standard. Fits 1978-1989.
    964-101-138-01 #8 Main bearing, standard. Fits 1978-1989.
    $250.00
    Add to Wish List
  44. 964-101-138-54 Main Bearing #8 Nose Bearing 96410113854 964.101.138.54
    964-101-138-54 Main Bearing #8 Nose Bearing 96410113854 964.101.138.54
    $350.00
    Add to Wish List
  45. 900-012-061-00 Crankshaft Dowel Pin Crankshaft dowel pin, fits 911, 912, 964, 993 and 914-6, Also 356 transmission usage.
    900-012-061-00 Crankshaft Dowel Pin Crankshaft dowel pin, fits 911, 912, 964, 993 and 914-6, Also 356 transmission usage.
    $1.04
    Add to Wish List
  46. 901-102-147-00 Timing Gear Woodruff Key Fits 356, 912 1965-1969, 911 964 993 1965-1998.
    901-102-147-00 Timing Gear Woodruff Key Fits 356, 912 1965-1969, 911 964 993 1965-1998.
    $13.66
    Add to Wish List
  47. 901-102-145-00 Crankshaft gear spacer. Fits 911 964 993 1965-1998.
    901-102-145-00 Crankshaft gear spacer. Fits 911 964 993 1965-1998.
    $45.81
    Add to Wish List
  48. 930-102-115-02 Brass Distributor Timing Gear Fits 911SC 1978-83 and 911 Turbo 1984-89
    930-102-115-02 Brass Distributor Timing Gear Fits 911SC 1978-83 and 911 Turbo 1984-89
    $160.20
    Add to Wish List
  49. 901-102-148-02 Snap ring for Brass Distributor Gear, 2.2mm. Fits 911 964 993 1978-1998
    901-102-148-02 Snap ring for Brass Distributor Gear, 2.2mm. Fits 911 964 993 1978-1998
    $9.20
    Add to Wish List
  50. 930-102-028-09 Pulley. Fits 911 1978-1979 without A/C
    930-102-028-09 Pulley. Fits 911 1978-1979 without A/C
    $358.16
    Add to Wish List
  51. 930-102-126-02 Pulley for 1978-1989 911 Turbo, Single Row, No A/C.
    930-102-126-02 Pulley for 1978-1989 911 Turbo, Single Row, No A/C.
    $624.60
    Add to Wish List
  52. 911-102-017-50 V-belt Pulley fits all 911 models from 1965-1977.Also fits 914-6 models
    911-102-017-50 V-belt Pulley fits all 911 models from 1965-1977.Also fits 914-6 models
    $212.50
    Add to Wish List
  53. 999-093-005-02 Crankshaft Pulley Bolt, Fits 911, 914-6. 964 1965-1994
    999-093-005-02 Crankshaft Pulley Bolt, Fits 911, 914-6. 964 1965-1994
    $15.23
    Add to Wish List
  54. 900-028-014-01 13mm x 23mm SS Washer. Fits 911, 964 914-6.
    900-028-014-01 13mm x 23mm SS Washer. Fits 911, 964 914-6.
    $0.90
    Add to Wish List
  55. SIC-102-991-14 Speedi Sleeve for Crank Pulley Sealing Surface. Solves Sealing Issues from Wear Grooves on Pulley. Fits 911 1965-98
    SIC-102-991-14 Speedi Sleeve for Crank Pulley Sealing Surface. Solves Sealing Issues from Wear Grooves on Pulley. Fits 911 1965-98
    $47.00
    Add to Wish List
  56. SIC-102-992-54 Speedi Sleeve - Crankshaft Flywheel End, Fits 911 1965-1977 and 914-6.
    SIC-102-992-54 Speedi Sleeve - Crankshaft Flywheel End, Fits 911 1965-1977 and 914-6.
    $65.00
    Add to Wish List
  57. SIC-102-993-51 Speedi Sleeve - Crankshaft Flywheel End. Fits 911 1978-1989
    SIC-102-993-51 Speedi Sleeve - Crankshaft Flywheel End. Fits 911 1978-1989
    $74.00
    Add to Wish List
  58. SIC-102-998-20 Speedi Sleeve Fits 911 1974-89 930
    SIC-102-998-20 Speedi Sleeve Fits 911 1974-89 930
    $56.55
    Add to Wish List
  59. 914-103-141-00-SET Connecting Rod Bearing Set, Standard Size For 2.4, 2.7 Liter911 1972-1977 as well as 3.0L Turbo 76-77
    914-103-141-00-SET Connecting Rod Bearing Set, Standard Size For 2.4, 2.7 Liter911 1972-1977 as well as 3.0L Turbo 76-77
    $125.00
    Add to Wish List
  60. 999-113-426-41 Flywheel End Crankshaft Oil Seal Fits 911 964 993 924 944
    999-113-426-41 Flywheel End Crankshaft Oil Seal Fits 911 964 993 924 944
    $61.22
    Add to Wish List
  61. 901-102-148-00 Lock Snap Ring For Brass Gear 2.4mm, fits 356, 912 (excluding 912e) and 911 from 1965-1998, 914-6
    901-102-148-00 Lock Snap Ring For Brass Gear 2.4mm, fits 356, 912 (excluding 912e) and 911 from 1965-1998, 914-6
    $9.20
    Add to Wish List
  62. N-101-090-0A Dowel Pin at Crank Pulley Fits 911 / 912 / 930 964 993 1965-98
    N-101-090-0A Dowel Pin at Crank Pulley Fits 911 / 912 / 930 964 993 1965-98
    $3.51
    Add to Wish List
  63. 911-116-239-04 Flywheel Ring Gear. Genuine Porsche. Fits 911 1970-1986 91111623904
    911-116-239-04 Flywheel Ring Gear. Genuine Porsche. Fits 911 1970-1986 91111623904
    $418.46
    Add to Wish List
  64. SIC-101-138-03 Main Bearing #8 Standard Case / Standard Crank. Fits 911, 914-6, 930 1965-1977
    SIC-101-138-03 Main Bearing #8 Standard Case / Standard Crank. Fits 911, 914-6, 930 1965-1977
    $175.00
    Add to Wish List
View as Grid List

64 Items

per page
Set Descending Direction
SHOP BY
Category
  1. Individual Bearings

 

 

© 2025 Stoddard NLA LLC. All Rights Reserved.