NLA-105-012-00 NeuTek Stock Grind Replacement Camshaft for 356 SC and 912

NeuTek camshaft. New part, Factory lift and duration, Exact replacement for 356 SC and 912. This camshaft is a new chilled-iron casting with lobes ground to 356SC/912 specs. For most stock, or near stock engines, this cam will give added power compared to an original "Normal" cam. Specifications are: Duration: 244 degrees Lift, exh and int: .332" Lobe separation: 108.2 degrees. All new camshafts should be installed along with new or re-ground tappets. Motul break-in oil should be used for initial start-up. Then, switch over to Motul Classic Oil for normal driving.