AUTOMATIC LIGHT IGNITION SYSTEM for Porsche Cayenne 957 07-10 • 2008 • Cayenne V6 • Manual Gearbox, 6 Speed
Stoddard price list
$896.04
99A 001 003 883
Stoddard
Cayenne 957 07-10
2008 - Cayenne V6
1
0.617 lbs
With this automatic lighting system, improve your driving comfort thanks to the high beams and dashboard instruments that will automatically turn on when the environment becomes (or is) darker (at dawn, at dusk, when passing through a tunnel, etc.). By also activating the PCM night mode, this system will also activate the lights at high speed. This "Pro Auto Light Systems" (PALS) automatic lighting accessory is CE and E11 certified and approved. It works with your vehicle's original switch and is only suitable for 911, 977, MK1 and MK2, Cayenne 955 and 957, Boxster and Cayman 987. Installation in 5 steps: 1. Clean the windscreen with the cleaning kit, position and then stick the sensor, cable upwards. / 2. Pass the cable with the orange tool. / 3. Press and hold the switch selector in position âEUR¢, turn it to the right until it stops, pull it towards and disconnect the switch cable. / 4. Open the cover on the side of the dashboard to access the compartment located behind the switch, pass the PALS connector through it as well as the rest of the cable. / 5. Connect the PALS connector between the socket and the switch then lock the latter by turning it this time to the left.
With this automatic lighting system, improve your driving comfort thanks to the high beams and dashboard instruments that will automatically turn on when the environment becomes (or is) darker (at dawn, at dusk, when passing through a tunnel, etc.). By also activating the PCM night mode, this system will also activate the lights at high speed. This "Pro Auto Light Systems" (PALS) automatic lighting accessory is CE and E11 certified and approved. It works with your vehicle's original switch and is only suitable for 911, 977, MK1 and MK2, Cayenne 955 and 957, Boxster and Cayman 987. Installation in 5 steps: 1. Clean the windscreen with the cleaning kit, position and then stick the sensor, cable upwards. / 2. Pass the cable with the orange tool. / 3. Press and hold the switch selector in position âEUR¢, turn it to the right until it stops, pull it towards and disconnect the switch cable. / 4. Open the cover on the side of the dashboard to access the compartment located behind the switch, pass the PALS connector through it as well as the rest of the cable. / 5. Connect the PALS connector between the socket and the switch then lock the latter by turning it this time to the left.
Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.