Back

Boxster 987 05-08

2005 • Boxster 2.7 • Cabrio • Manual Gearbox, 5 Speed

Left-hand drive

POLYURETHANE INSERT FOR ENGINE MOUNTING for Porsche Boxster 987 05-08 • 2005 • Boxster 2.7 • Cabrio • Manual Gearbox, 5 Speed

Stoddard price list

$48.48

Reference : 99A 000 573 554

Manufacturer : Stoddard

Series selected : Boxster 987 05-08

Model selected : 2005 - Boxster 2.7

Recommended : 1

Weight : 0.088 lbs

Comments : A polyurethane insert fits into these voids in the original mount to provide a quick and easy way to limit engine movement and provide additional engine stability under acceleration and gear changes. Whilst inserts are a good way to prolong the life of the original mount, it is recommended that they are fitted to mounts that are still in good condition and without cracking

A polyurethane insert fits into these voids in the original mount to provide a quick and easy way to limit engine movement and provide additional engine stability under acceleration and gear changes. Whilst inserts are a good way to prolong the life of the original mount, it is recommended that they are fitted to mounts that are still in good condition and without cracking

All Part Variants Available

Estimate shipping costs for this part

All Part Variants Available (Detailed list)

In the same category

The other parts in the family « Engine and fuel feed »

See all products

Other diagrams in the family « Engine and fuel feed »

ENGINE CRANKCASE / IMPULSE GENERATOR / PINKING DETECTOR for Porsche Boxster 987 05-08 • 2005 • Boxster 2.7 • Cabrio • Manual Gearbox, 5 Speed

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

POLYURETHANE INSERT FOR ENGINE MOUNTING for Porsche Boxster 987 05-08 • 2005 • Boxster 2.7 • Cabrio • Manual Gearbox, 5 Speed

All Part Variants Available (Detailed list)

POLYURETHANE INSERT FOR ENGINE MOUNTING

POLYURETHANE RESILIENT MOUNT FOR ENGINE CONSOLE

In the same category

Engine Mount Insert For Boxster And Cayman 1997-2008

The other parts in the family « Engine and fuel feed »

ENGINE OIL DRAIN VALVE

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL 2 LITRES

STAINLESS STEEL OIL PAN DEFLECTOR KIT

Thermostat-12AN male

KN SPORTS AIR FILTER

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

DIRECT INLET KIT

DIRECT INTAKE KIT

ENGINE OIL MOBIL1 0W40 1 LITRES

ENGINE OIL MOBIL1 0W40 5 LITRES

GULF FLAT OIL 4 - 6 5W50 4.5 LITRES

FUEL CAP PLASTIC

SERVICE KIT - BOXSTER 987 2005-2008 / CAYMAN 2006-2008

TENSIONING ROLLER KIT

IMS BEARING REPLACEMENT TOOL KIT

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT FITTING ENTAILS REMOVAL OF THE ENGINE

MODIFICATION KIT FOR INTERMEDIATE SHAFT LUBRICATION

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

SET OF SEALS

GASKET SET

CONROD BEARINGS SET REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT RIGHT

POLYURETHANE INSERT FOR ENGINE MOUNTING

POLYURETHANE RESILIENT MOUNT FOR ENGINE CONSOLE

ENGINE OIL DRAIN VALVE

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL 2 LITRES

STAINLESS STEEL OIL PAN DEFLECTOR KIT

Thermostat-12AN male

KN SPORTS AIR FILTER

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

DIRECT INLET KIT

DIRECT INTAKE KIT

ENGINE OIL MOBIL1 0W40 1 LITRES

ENGINE OIL MOBIL1 0W40 5 LITRES

GULF FLAT OIL 4 - 6 5W50 4.5 LITRES

FUEL CAP PLASTIC

SERVICE KIT - BOXSTER 987 2005-2008 / CAYMAN 2006-2008

TENSIONING ROLLER KIT

IMS BEARING REPLACEMENT TOOL KIT

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT FITTING ENTAILS REMOVAL OF THE ENGINE

MODIFICATION KIT FOR INTERMEDIATE SHAFT LUBRICATION

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

SET OF SEALS

GASKET SET

CONROD BEARINGS SET REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT RIGHT

POLYURETHANE INSERT FOR ENGINE MOUNTING

POLYURETHANE RESILIENT MOUNT FOR ENGINE CONSOLE

Engine lubrication / oil cooling

ENGINE OIL DRAIN VALVE

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL 2 LITRES

STAINLESS STEEL OIL PAN DEFLECTOR KIT

Thermostat-12AN male

Inlet - filtration

KN SPORTS AIR FILTER

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

DIRECT INLET KIT

DIRECT INTAKE KIT

Engine oil

ENGINE OIL MOBIL1 0W40 1 LITRES

ENGINE OIL MOBIL1 0W40 5 LITRES

GULF FLAT OIL 4 - 6 5W50 4.5 LITRES

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT