Back

912

1966 • 912 1.6 • Coupe • Manual Gearbox, 4 Speed

Left-hand drive

AIR-COOLED DEEP OIL SUMP KIT for Porsche 912 • 1966 • 912 1.6 • Coupe • Manual Gearbox, 4 Speed

Stoddard price list

$1,629.73

Reference : 99A 001 083 116

Manufacturer : Stoddard

Series selected : 912

Model selected : 1966 - 912 1.6

Recommended : 1

Weight : 8.073 lbs

Comments : This deep oil sump with high-quality aluminum cooling fins features a slim design and a capacity of 1.7 liters. A magnet and an oil pickup tube extension are integrated. It is possible to use an oil screen or open the lid for cleaning. The part is ready to install as it is sold as a complete unit.

This deep oil sump with high-quality aluminum cooling fins features a slim design and a capacity of 1.7 liters. A magnet and an oil pickup tube extension are integrated. It is possible to use an oil screen or open the lid for cleaning. The part is ready to install as it is sold as a complete unit.

All Part Variants Available

Estimate shipping costs for this part

All Part Variants Available (Detailed list)

The other parts in the family « Engine and fuel feed »

See all products

Other diagrams in the family « Engine and fuel feed »

ENGINE CASING / CRANKSHAFT OIL SEAL / ENGINE CASING STUD / OIL STRIP GASKET for Porsche 912 • 1966 • 912 1.6 • Coupe • Manual Gearbox, 4 Speed

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

AIR-COOLED DEEP OIL SUMP KIT for Porsche 912 • 1966 • 912 1.6 • Coupe • Manual Gearbox, 4 Speed

All Part Variants Available (Detailed list)

High Performance Deep Oil Sump Kit For 356 And 912

AIR-COOLED DEEP OIL SUMP KIT

The other parts in the family « Engine and fuel feed »

Genuine Porsche Oil Filter Can use: NLA07828 Mahle brand Original Mounting / montage origine

Oil filter Insert For 356 912 Adaptive / adaptable

AIR-COOLED DEEP OIL SUMP KIT

High Performance Deep Oil Sump Kit For 356 And 912

Oil Pressure Sender, Vdo 2 Pole, 0-5 Bar

ENGINE RADIATOR INSTALLATION KIT 356B + 356C + 912

Collapsible Pushrod Tube For 356 And 912

Factory Style Push Rod Tube For 356 912, 8 Required

Solid Pushrod Tube Kit For 356 And 912 61610523101

Oil Pressure Kit 356A 356B 356C 912

OIL PRESSURE VALVE KIT 356 58-65 + 912

Thermostat-12AN male

Cohline Hose Ferrule 20mm Id With 14mm Opening. 8012000

Nut For Small Oil Hose

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

Porsche Classic Engine Oil 20w50 1 Liter . Ground Shipping Only. 1 LITRES

5 LITER 20W50 5 LITRES

GULF CLASSIC 20W50 OIL 5 LITRES

Bag For Porsche Classic Motor Oil Pcg.043.209.00

Oil Type Decal 20w50 For Porsche Classic Oil

TAG

Fuel Filter Bosch. Inline For Pre-1969 Carbureted Cars 55mm dia. 92mm long 8mm in/out

1965-1976 PORSCHE® 911 FUEL PUMP "A" 12V

Pierburg Style Fuel Pump For 356A 356B 356C 912 New part

Seal For Pushrod On Late 356 912 Fuel Pump

Fuel Pump Rebuild Kit, Late 356, 912 ref 64410890301

100 Liter Fuel Tank For 911 912 1965-1973 100 LITRES

COMPLETE 110 LITRE COMPETITION TANK WITH GAUGE, FILLER CAP AND STRAP

Fuel Tank, 62 Liter Capacity For 911 912 1965-1973 62 LITRES

PROTECTIVE SHEET UNDER FUEL TANK

TOWING HOOK FOR UNDERTANK PROTECTIVE SHEET

Fuel Level Sending Unit 911 912 914 1965-1989

Fuel Level Sending Unit 911 912 914 1965-1989

GASKETRING

Cohline 2122 Braided Fuel Line, 12mm Id-Sold By The Meter. Safe For Up To E10

Cohline 2122 Braided Fuel Line, 6mm Id- Sold By The Meter

Cohline 2122 Braided Fuel Line, 7.5mm Id- Sold By The Meter. Safe For Up To E10 Ethanol

Cohline 2122 Braided Fuel Line, 9mm Id- Sold By The Meter. Safe For Up To E10 Ethanol

FUEL HOSE SOLD BY THE METRE / 3 MM

FUEL HOSE SOLD BY THE METRE / 4 MM

FUEL HOSE SOLD BY THE METRE / 7 MM

FUEL HOSE SOLD BY THE METRE / 8 MM

FUEL HOSE SOLD BY THE METRE / 9 MM

Ferrule For Fuel Pump Hoses. Made By Cohline, 801-1000 10mm Id / 6mm Opening

Hose Ferrule Or Collar. 13.5mm Id, Fitting Hole: 9.2mm 8001-1350 Cohline

NARROW V-BELT Adaptive / adaptable

Porsche Fan Belt 9.5 X 825mm 356A Through 356C And 912. Original Mounting / montage origine

Neutek Camshaft Sx2 Street And Vintage Race Cam.

Neutek Camshaft Zh-1

Neutek Camshaft Zh-2 For Hot Street Or Vintage Racing.

Improved Top End Gasket Set For 356 / 912 With Solex Carbs, With Viton Pushrod Tube Seals

Improved Top End Gasket Set For 356 With Zenith Carbs With Viton Pushrod Tube Seals

Top End Gasket Set, Victor Reinz For All 356 And 912

Engine Case Gasket Set For 356 And 912 Pushrod Motors With Upgraded Viton Seals

Engine Case Gasket Set For All 356 And 912

Oil Sump Gasket 356 And 912. (2 Required.) New Profile And Coating For Better Performance.

Steel Core Composite Valve Cover Gasket Pair For All 356 And 912 SET OF 2

Valve Cover Gasket - Cork Type

Flywheel End Oil Seal For 356 And 912. Double Lip.

Flywheel End Oil Seal. Viton For 356 And 912

Main Bearing Set, Steel, For 356C And 912 55mm Crank. 1st .25mm Case/1st .25mm Inside Crank. INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Second .50mm Inside Crank. INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Standard Inside Crank. INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Third .75mm Inside Crank. INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/3rd .75mm Inside Crank. INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/First .25mm Inside Crank. INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Second .50mm Inside Crank. INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Standard Inside Crank. INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT STANDARD

Rod Bearing Set For 356B, 356C And 912. First Undersize (.25mm) REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

Rod Bearing Shell Half, Alloy, Standard Size, For 356B, 356C, And 912.

Second Undersize (0.50mm) Rod Bearing Set 356B, 356C 356sc, 912 REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

Standard Rod Bearing Set, Alloy, For 356B, 356C And 912 STANDARD MEASUREMENT / COMPLETE KIT

Connecting Rod Nut All 356 And 912

Deves 1860 020 Piston Rings Set For 1600 Big Bore Pistons, 85.50 Bore.

Genuine Porsche Oil Filter Can use: NLA07828 Mahle brand
Original Mounting / montage origine

Oil filter Insert For 356 912
Adaptive / adaptable

Porsche Classic Engine Oil 20w50 1 Liter . Ground Shipping Only.
1 LITRES

5 LITER 20W50
5 LITRES

GULF CLASSIC 20W50 OIL
5 LITRES

Pierburg Style Fuel Pump For 356A 356B 356C 912
New part

100 Liter Fuel Tank For 911 912 1965-1973
100 LITRES

Fuel Tank, 62 Liter Capacity For 911 912 1965-1973
62 LITRES

FUEL HOSE
SOLD BY THE METRE / 3 MM

FUEL HOSE
SOLD BY THE METRE / 4 MM

FUEL HOSE
SOLD BY THE METRE / 7 MM

FUEL HOSE
SOLD BY THE METRE / 8 MM

FUEL HOSE
SOLD BY THE METRE / 9 MM

NARROW V-BELT
Adaptive / adaptable

Porsche Fan Belt 9.5 X 825mm 356A Through 356C And 912.
Original Mounting / montage origine

Steel Core Composite Valve Cover Gasket Pair For All 356 And 912
SET OF 2

Main Bearing Set, Steel, For 356C And 912 55mm Crank. 1st .25mm Case/1st .25mm Inside Crank.
INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Second .50mm Inside Crank.
INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Standard Inside Crank.
INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Third .75mm Inside Crank.
INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/3rd .75mm Inside Crank.
INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/First .25mm Inside Crank.
INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Second .50mm Inside Crank.
INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Standard Inside Crank.
INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT STANDARD

Rod Bearing Set For 356B, 356C And 912. First Undersize (.25mm)
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

Second Undersize (0.50mm) Rod Bearing Set 356B, 356C 356sc, 912
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

Standard Rod Bearing Set, Alloy, For 356B, 356C And 912
STANDARD MEASUREMENT / COMPLETE KIT

Piston Cylinder Set 1720cc 86mm JE / Biral 356C 356sc 912.
SET OF 4

SPORT PISTON AND CYLINDER 1,750 CC
SOLD PER UNIT

KIT OF 4 COMPLETE SETS OF PISTON RINGS FOR 1750 CC CYLINDER AND PISTON KIT 356 AND 912 (VERSION WITH 4 RINGS PER PISTON)
2/2/2/5 x 86 MM

CP-CARRILLO PRO H CONNECTING ROD SET FOR 356/912 WITH 1/4" CARR BOLTS
CARRILLO MAKE

CYLINDER HEAD 356 912
SANS SOUPAPE / ONE

Pair of All New Cylinder Heads For 356 And 912 From Wilhoit Auto Restoration
PAIR

CAMSHAFT
32MM CAMS / 32 MM

CAMSHAFT
33MM CAMS / 33 MM

CAMSHAFT
34.5 mm cams / 34.50 MM

CAMSHAFT
35mm Cams / 35 MM

Pushrod Set Of Eight, Standard Length 256.7, Lw For 356 And 912
COMPLETE KIT FOR A VEHICLE

BOSCH STICKER FOR 12 VOLT IGNITION COIL
12 VOLT

COLOURED WING PROTECTION ELEMENT FOR FUEL FILLER PIPE
BLUE / BLUE

COLOURED WING PROTECTION ELEMENT FOR FUEL FILLER PIPE
RED / RED

COLOURED WING PROTECTION ELEMENT FOR FUEL FILLER PIPE
YELLOW / YELLOW

Gas Filler Flap. 911 1974-1989.
BLACK / BLACK

RSR STYLE CENTRAL FILLER CAP KIT
ALU BROSSÉ / (BROSSE)

RSR STYLE CENTRAL FILLER CAP KIT
POLISHED / POLISHED

RSR STYLE CENTRAL FILLER CAP KIT
BLACK / BLACK

Einlass Decal, Red Lettering For Late 912, Water Transfer
TRANSFER

Genuine Porsche Oil Filter Can use: NLA07828 Mahle brand
Original Mounting / montage origine

Oil filter Insert For 356 912
Adaptive / adaptable