Back

356C

1963 • 1600 C (616/15) • Cabrio C • Manual Gearbox, 4 Speed

Left-hand drive

LN 356 912 86mm 1720cc Piston Cylinder Set 63.5-66.5cc Combustion Chambers for Porsche 356C • 1963 • 1600 C (616/15) • Cabrio C • Manual Gearbox, 4 Speed

PS86005N - LN 356 912 86mm 1720cc Piston Cylinder Set 63.5-66.5cc Combustion Chambers for Porsche 356C • 1963 • 1600 C (616/15) • Cabrio C • Manual Gearbox, 4 Speed

Stoddard price list

$4,700.00

Reference : PS 860 05N

Manufacturer :

Series selected : 356C

Model selected : 1963 - 1600 C (616/15)

Recommended : 1

Weight : 14.33 lbs

Lead time : 15 days

PS86-005N LN Engineering Porsche 356 and 912 86mm|1720cc Nickies Cylinder and Mahle Piston Set (Slip-in case register) 63.5-66.5cc Combustion Chambers

Bore (mm)	Stroke (mm)	Rod (mm)	Comp Height (mm)	Pin (mm)	Crown Vol (cc)	Piston Weight (g)	Comp. Ratio @1mm deck clearance (head volume)
86	74	139.95	27.05	22	21.8	307	10 (63.5cc) \| 9.5 (66.5cc)

All Part Variants Available

Estimate shipping costs for this part

All Part Variants Available (Detailed list)

The other parts in the family « Engine and fuel feed »

See all products

Other diagrams in the family « Engine and fuel feed »

BODYWORK LOGO / BODYWORK LABEL / ENGINE LABEL

ENGINE SUMP / CRANKSHAFT LIP SEAL / ENGINE SUMP PIN / STRAINER SEAL

BEARING / FLYWHEEL / CONNECTING ROD / CRANKSHAFT PULLEY

CYLINDER HEAD / VALVE / VALVE GUIDE / SPRING / CYLINDER HEAD NUT / PISTON RING / CYLINDER PISTONS

CAMSHAFT / CAMSHAFT GEAR / ROCKER / VALVE LIFTER / PUSH ROD / PUSH ROD CASING

OIL COOLER / OIL FILTER / OIL PUMP / OIL HOSE / OIL DIP TUBE / BREATHER TUBE

ENGINE PANELS / ENGINE BLOWER / HEATING

ENGINE PANELS / ENGINE BLOWER / HEATING, NEW VERSION

ZENITH CARBURETTOR ZENITH - SOLEX / INLET GASKET / CONTROL ROD

FUEL PUMP / FUEL HOSE

CARBURETTOR ZENITH 32 NDIX

REPLACEMENT PARTS FOR FUEL PUMP, 356, 1963-1965

FUEL TANK / FUEL TAP / FUEL GAUGE

FRONT BOOT PLATE / STRIKER HOLDER / REAR WHEEL ARCH CLOSING PLATE / FRONT WING CLOSING PLATE

PASSENGER COMPARTMENT SOUNDPROOFING / ENGINE SOUNDPROOFING / FRONT BOOT SOUNDPROOFING

DYNAMO / STARTER MOTOR / IGNITION HARNESS / COIL / DISTRIBUTOR HEAD / DISTRIBUTOR ROTOR / DYNAMO BELT / DYNAMO PULLEY / OIL PRESSURE CONTACTOR / TEMPERATURE SENSOR

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

LN 356 912 86mm 1720cc Piston Cylinder Set 63.5-66.5cc Combustion Chambers for Porsche 356C • 1963 • 1600 C (616/15) • Cabrio C • Manual Gearbox, 4 Speed

All Part Variants Available (Detailed list)

LN 356 912 86mm 1720cc Piston Cylinder Set 63.5-66.5cc Combustion Chambers

LN 356 912 86mm 1720cc Piston Cylinder Set 60.5-63.5cc Combustion Chambers

The other parts in the family « Engine and fuel feed »

AIR-COOLED DEEP OIL SUMP KIT

High Performance Deep Oil Sump Kit For 356 And 912

Oil Pressure Sender, Vdo 2 Pole, 0-5 Bar

ENGINE RADIATOR INSTALLATION KIT 356B + 356C + 912

Collapsible Pushrod Tube For 356 And 912

Factory Style Push Rod Tube For 356 912, 8 Required

Solid Pushrod Tube Kit For 356 And 912 61610523101

Oil Pressure Kit 356A 356B 356C 912

OIL PRESSURE VALVE KIT 356 58-65 + 912

Thermostat-12AN male

Argus 90 DEG M26X1.5

Cohline Hose Ferrule 20mm Id With 14mm Opening. 8012000

Nut For Small Oil Hose

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

Porsche Classic Engine Oil 20w50 1 Liter . Ground Shipping Only. 1 LITRES

5 LITER 20W50 5 LITRES

GULF CLASSIC 20W50 OIL 5 LITRES

Bag For Porsche Classic Motor Oil Pcg.043.209.00

Oil Type Decal 20w50 For Porsche Classic Oil

TAG

FACET FUEL PUMP

FUEL PUMP 12 VOLT

HARDI 6V 356 FUEL PUMP 6 VOLT

Seal For Pushrod On Late 356 912 Fuel Pump

BENDIX STICKER ON FUEL PUMP 356 AND 911

Fuel Cock Repair Kit For Late 356 Pre-A, 356A, 356B, And 356C

Fuel Pump Rebuild Kit, Late 356, 912 ref 64410890301

Fuel Tank, Grey, For 356B T6 And 356C GREY / GREY

Fuel Tank, Satin Black for 356B, T6 and 356C BLACK / BLACK / 50 LITRES

Precision-Cut Sound Deadening For Top Of 356B T6 And 356C Fuel Tank

Dipstick, For Petrol / Gas, In Liters With Leather Sleeve.

Fuel Gauge Damper Unit For 356. Eliminates Fuel Gauge Needle jumping

Cohline 2122 Braided Fuel Line, 12mm Id-Sold By The Meter. Safe For Up To E10

Cohline 2122 Braided Fuel Line, 6mm Id- Sold By The Meter

Cohline 2122 Braided Fuel Line, 7.5mm Id- Sold By The Meter. Safe For Up To E10 Ethanol

Cohline 2122 Braided Fuel Line, 9mm Id- Sold By The Meter. Safe For Up To E10 Ethanol

FUEL HOSE SOLD BY THE METRE / 3 MM

FUEL HOSE SOLD BY THE METRE / 4 MM

FUEL HOSE SOLD BY THE METRE / 7 MM

FUEL HOSE SOLD BY THE METRE / 8 MM

FUEL HOSE SOLD BY THE METRE / 9 MM

Fuel Tank Vent Hose 11 mm Id, 17mm OD Sold Per Meter.

RUBBER GROMMET FOR FUEL PIPE 356 ALL

Ferrule For Fuel Pump Hoses. Made By Cohline, 801-1000 10mm Id / 6mm Opening

Hose Ferrule Or Collar. 13.5mm Id, Fitting Hole: 9.2mm 8001-1350 Cohline

Neutek Camshaft Sx2 Street And Vintage Race Cam.

Neutek Camshaft Zh-1

Neutek Camshaft Zh-2 For Hot Street Or Vintage Racing.

Engine Compartment Heat Shield Panel For 356B And 356C

Improved Top End Gasket Set For 356 / 912 With Solex Carbs, With Viton Pushrod Tube Seals

Improved Top End Gasket Set For 356 With Zenith Carbs With Viton Pushrod Tube Seals

Top End Gasket Set, Victor Reinz For All 356 And 912

Engine Case Gasket Set For 356 And 912 Pushrod Motors With Upgraded Viton Seals

Engine Case Gasket Set For All 356 And 912

Flywheel End Oil Seal For 356 And 912. Double Lip.

Flywheel End Oil Seal. Viton For 356 And 912

Main Bearing Set, Steel, For 356C And 912 55mm Crank. 1st .25mm Case/1st .25mm Inside Crank. INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Second .50mm Inside Crank. INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Standard Inside Crank. INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Third .75mm Inside Crank. INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/3rd .75mm Inside Crank. INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/First .25mm Inside Crank. INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Second .50mm Inside Crank. INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Standard Inside Crank. INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT STANDARD

Rod Bearing Set For 356B, 356C And 912. First Undersize (.25mm) REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

Rod Bearing Shell Half, Alloy, Standard Size, For 356B, 356C, And 912.

Second Undersize (0.50mm) Rod Bearing Set 356B, 356C 356sc, 912 REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

Standard Rod Bearing Set, Alloy, For 356B, 356C And 912 STANDARD MEASUREMENT / COMPLETE KIT

RING 356A+B 1600 2/2/2/5

Deves 1860 020 Piston Rings Set For 1600 Big Bore Pistons, 85.50 Bore.

Deves 1860 Std Piston Ring Set For 1600 Big Bore Pistons, 85.0 Bore.

PISTONS CYLINDERS 356 1600 75 HP (SET OF 4) (1 MM COPPER GASKET REQUIRED FOR 356A-B)

Cast Iron Cylinder Set, 86mm, for 356 912

86mm JE Piston Biral Cylinder Set For 356A And 356B

Porsche Classic Engine Oil 20w50 1 Liter . Ground Shipping Only.
1 LITRES

5 LITER 20W50
5 LITRES

GULF CLASSIC 20W50 OIL
5 LITRES

FUEL PUMP
12 VOLT

HARDI 6V 356 FUEL PUMP
6 VOLT

Fuel Tank, Grey, For 356B T6 And 356C
GREY / GREY

Fuel Tank, Satin Black for 356B, T6 and 356C
BLACK / BLACK / 50 LITRES

FUEL HOSE
SOLD BY THE METRE / 3 MM

FUEL HOSE
SOLD BY THE METRE / 4 MM

FUEL HOSE
SOLD BY THE METRE / 7 MM

FUEL HOSE
SOLD BY THE METRE / 8 MM

FUEL HOSE
SOLD BY THE METRE / 9 MM

Main Bearing Set, Steel, For 356C And 912 55mm Crank. 1st .25mm Case/1st .25mm Inside Crank.
INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Second .50mm Inside Crank.
INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Standard Inside Crank.
INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. First .25mm Case/Third .75mm Inside Crank.
INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT +0.25

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/3rd .75mm Inside Crank.
INTERIOR MEASUREMENT -0.75 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/First .25mm Inside Crank.
INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Second .50mm Inside Crank.
INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT STANDARD

Main Bearing Set, Steel, For 356C And 912 55mm Crank. Standard Case/Standard Inside Crank.
INTERIOR MEASUREMENT STANDARD / EXTERIOR MEASUREMENT STANDARD

Rod Bearing Set For 356B, 356C And 912. First Undersize (.25mm)
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

Second Undersize (0.50mm) Rod Bearing Set 356B, 356C 356sc, 912
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

Standard Rod Bearing Set, Alloy, For 356B, 356C And 912
STANDARD MEASUREMENT / COMPLETE KIT

Piston Cylinder Set 1720cc 86mm JE / Biral 356C 356sc 912.
SET OF 4

SPORT PISTON AND CYLINDER 1,750 CC
SOLD PER UNIT

KIT OF 4 COMPLETE SETS OF PISTON RINGS FOR 1750 CC CYLINDER AND PISTON KIT 356 AND 912 (VERSION WITH 4 RINGS PER PISTON)
2/2/2/5 x 86 MM

CP-CARRILLO PRO H CONNECTING ROD SET FOR 356/912 WITH 1/4" CARR BOLTS
CARRILLO MAKE

CYLINDER HEAD 356 912
SANS SOUPAPE / ONE

Pair of All New Cylinder Heads For 356 And 912 From Wilhoit Auto Restoration
PAIR

CAMSHAFT
32MM CAMS / 32 MM

CAMSHAFT
33MM CAMS / 33 MM

CAMSHAFT
34.5 mm cams / 34.50 MM

CAMSHAFT
35mm Cams / 35 MM

Pushrod Set Of Eight, Standard Length 256.7, Lw For 356 And 912
COMPLETE KIT FOR A VEHICLE

Bosch 6 volt ignition coil decal
6 VOLT

Gas Filler Flap. 911 1974-1989.
BLACK / BLACK

Einlass Decal, Orange With Black Lettering., Water Transfer
TRANSFER

Fram Oil Filter Top Cover Decal, Water Transfer
TRANSFER

H-Filter Einlass Black Lettered Oil Filter Canister Side Decal, Water Transfer
TRANSFER

H-Filter Oil Filter Canister Top Cover Decal, Water Transfer
TRANSFER

Mann Oil Filter Canister Decal Set, Water Transfer
TRANSFER