Back

356A

1955 • 1300 (506/2) • Cabrio A T1 • Manual Gearbox, 4 Speed

Left-hand drive

VERY HIGH STRENGTH COMPETITION CYLINDER HEAD STUD KIT for Porsche 356A • 1955 • 1300 (506/2) • Cabrio A T1 • Manual Gearbox, 4 Speed

Stoddard price list

$778.56

Reference : 99A 000 566 427

Manufacturer : Stoddard

Series selected : 356A

Model selected : 1955 - 1300 (506/2)

Recommended : 1

Weight : 2.518 lbs

Comments : These engine fasteners are of excellent quality (aerospace grade), strong, and durable. Made of alloy steel with rolled threads and an anti-corrosion coating (applied via a special metallurgical process), these studs are ideal for improving engine performance and reliability: preventing head gasket leaks, reducing bearing wear, and minimizing crankshaft flex. These fasteners have been specifically designed with extensive expertise in the engine environment and its stresses. Suitable for road and racing use.

These engine fasteners are of excellent quality (aerospace grade), strong, and durable. Made of alloy steel with rolled threads and an anti-corrosion coating (applied via a special metallurgical process), these studs are ideal for improving engine performance and reliability: preventing head gasket leaks, reducing bearing wear, and minimizing crankshaft flex. These fasteners have been specifically designed with extensive expertise in the engine environment and its stresses. Suitable for road and racing use.

Estimate shipping costs for this part

The other parts in the family « Engine and fuel feed »

See all products

Other diagrams in the family « Engine and fuel feed »

DYNAMO / STARTER MOTOR / IGNITION HARNESS / COIL / DISTRIBUTOR HEAD / DISTRIBUTOR ROTOR / DYNAMO BELT / DYNAMO PULLEY / OIL PRESSURE CONTACTOR / TEMPERATURE SENSOR

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

VERY HIGH STRENGTH COMPETITION CYLINDER HEAD STUD KIT for Porsche 356A • 1955 • 1300 (506/2) • Cabrio A T1 • Manual Gearbox, 4 Speed

The other parts in the family « Engine and fuel feed »

HOUSING WITH ROLLER

AIR-COOLED DEEP OIL SUMP KIT

High Performance Deep Oil Sump Kit For 356 And 912

Oil Pressure Sender, Vdo 2 Pole, 0-5 Bar

ENGINE RADIATOR INSTALLATION KIT 356 +356A + 356B

Collapsible Pushrod Tube For 356 And 912

Factory Style Push Rod Tube For 356 912, 8 Required

Solid Pushrod Tube Kit For 356 And 912 61610523101

Thermostat-12AN male

Oil Pressure Switch With Screw Connection, Pre-A Thru 356B T-5

Argus 90 DEG M26X1.5

Cohline Hose Ferrule 20mm Id With 14mm Opening. 8012000

Nut For Small Oil Hose

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

Bag For Porsche Classic Motor Oil Pcg.043.209.00

Bp Energol Engine Oil Hang Tag. Appropriate For 356 Pre A Through T6

FUEL PUMP 6 VOLT

FUEL PUMP 12 VOLT

HARDI 6V 356 FUEL PUMP 6 VOLT

Fuel Pump Gasket .5mm Thick. 356A, 356B (w/early Fuel Pump)

Fuel Cock Repair Kit For Late 356 Pre-A, 356A, 356B, And 356C

Early Fuel Pump Rebuild Kit 356A, 356B.

Gas Tank (early) 356 Pre A 356A And 356B Through T5 (1950-1960 Powdercoated semi-gloss black, ready for final finishing before installation.

Gas Tank (early) 356 Pre A 356A And 356B Through T5 (1950-1960) Powdercoated semi-gloss black, ready for final finishing before installation.

Gas Tank Strap Set of Two, Short and Long. For 356 356A and 356B T5. Two Sets Required Per Car. PAIR

OPENING FOR FUEL TANK STRAP

Felt Strip Kit, For 356A Gas Tank Straps.

Fuel Tank Filler Cap Gasket. Cork, 356, 356A, 356B T5.

Original Style Blue Fuel Cap Gasket For 356

Dipstick, For Petrol / Gas, In Liters With Leather Sleeve.

Fuel Gauge Damper Unit For 356. Eliminates Fuel Gauge Needle jumping

Cohline 2122 Braided Fuel Line, 12mm Id-Sold By The Meter. Safe For Up To E10

Cohline 2122 Braided Fuel Line, 6mm Id- Sold By The Meter

Cohline 2122 Braided Fuel Line, 7.5mm Id- Sold By The Meter. Safe For Up To E10 Ethanol

Cohline 2122 Braided Fuel Line, 9mm Id- Sold By The Meter. Safe For Up To E10 Ethanol

FUEL HOSE SOLD BY THE METRE / 3 MM

FUEL HOSE SOLD BY THE METRE / 4 MM

FUEL HOSE SOLD BY THE METRE / 7 MM

FUEL HOSE SOLD BY THE METRE / 8 MM

FUEL HOSE SOLD BY THE METRE / 9 MM

Fuel Tank Vent Hose 11 mm Id, 17mm OD Sold Per Meter.

RUBBER GROMMET FOR FUEL PIPE 356 ALL

Ferrule For Fuel Pump Hoses. Made By Cohline, 801-1000 10mm Id / 6mm Opening

Hose Ferrule Or Collar. 13.5mm Id, Fitting Hole: 9.2mm 8001-1350 Cohline

Neutek Camshaft Zh-1

Neutek Camshaft Zh-2 For Hot Street Or Vintage Racing.

Improved Top End Gasket Set For 356 / 912 With Solex Carbs, With Viton Pushrod Tube Seals

Improved Top End Gasket Set For 356 With Zenith Carbs With Viton Pushrod Tube Seals

Top End Gasket Set, Victor Reinz For All 356 And 912

Engine Case Gasket Set For 356 And 912 Pushrod Motors With Upgraded Viton Seals

Engine Case Gasket Set For All 356 And 912

Oil Cooler Seal set, For Use With Stoddard Aluminum Cooler On Early 356, 356 A

Deves 1860 020 Piston Rings Set For 1600 Big Bore Pistons, 85.50 Bore.

Deves 1860 Std Piston Ring Set For 1600 Big Bore Pistons, 85.0 Bore.

Cast Iron Cylinder Set, 86mm, for 356 912

86mm JE Piston Biral Cylinder Set For 356A And 356B

Big Bore 86mm Porsche 356/912 pistons with Biral cylinders. It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965

040 Piston Ring Set For 1600 Big Bore Pistons, 86.0 Bore

ADAPTATION KIT 1750 CC CYLINDERS PISTONS ON 356 A/B

Piston Cylinder Set 1720cc 86mm JE / Biral 356C 356sc 912. SET OF 4

SPORT PISTON AND CYLINDER 1,750 CC SOLD PER UNIT

LN 356 912 86mm 1720cc Piston Cylinder Set 63.5-66.5cc Combustion Chambers

LN 356 912 86mm 1720cc Piston Cylinder Set 60.5-63.5cc Combustion Chambers

KIT OF 4 COMPLETE SETS OF PISTON RINGS FOR 1750 CC CYLINDER AND PISTON KIT 356 AND 912 (VERSION WITH 4 RINGS PER PISTON) 2/2/2/5 x 86 MM

CRANKSHAFT

CP-CARRILLO PRO H CONNECTING ROD SET FOR 356/912 WITH 1/4" CARR BOLTS CARRILLO MAKE

Exhaust Valve Guide. .559-inch Od. Oversize. 356 912

HEAVY DUTY ALUMINUM PUSH ROD

Pushrod Set, Short, Set Of Eight 255.7, Lw For 356 And 912 With Decked Cylinder Heads

ALUMINUM VALVE COVER KIT

ARP 2000 Porsche 356 912 Head Stud, Set Of 16,

CAMSHAFT 32MM CAMS / 32 MM

CAMSHAFT 33MM CAMS / 33 MM

CAMSHAFT 34.5 mm cams / 34.50 MM

CAMSHAFT 35mm Cams / 35 MM

Pushrod Set Of Eight, Standard Length 256.7, Lw For 356 And 912 COMPLETE KIT FOR A VEHICLE

Valve Adjustment Screw Set, Heavy Duty (8 pcs). 356,912 Stoddard Exclusive, Made in USA

FUEL PUMP
6 VOLT

FUEL PUMP
12 VOLT

HARDI 6V 356 FUEL PUMP
6 VOLT

Gas Tank Strap Set of Two, Short and Long. For 356 356A and 356B T5. Two Sets Required Per Car.
PAIR

FUEL HOSE
SOLD BY THE METRE / 3 MM

FUEL HOSE
SOLD BY THE METRE / 4 MM

FUEL HOSE
SOLD BY THE METRE / 7 MM

FUEL HOSE
SOLD BY THE METRE / 8 MM

FUEL HOSE
SOLD BY THE METRE / 9 MM

Piston Cylinder Set 1720cc 86mm JE / Biral 356C 356sc 912.
SET OF 4

SPORT PISTON AND CYLINDER 1,750 CC
SOLD PER UNIT

KIT OF 4 COMPLETE SETS OF PISTON RINGS FOR 1750 CC CYLINDER AND PISTON KIT 356 AND 912 (VERSION WITH 4 RINGS PER PISTON)
2/2/2/5 x 86 MM

CP-CARRILLO PRO H CONNECTING ROD SET FOR 356/912 WITH 1/4" CARR BOLTS
CARRILLO MAKE

CAMSHAFT
32MM CAMS / 32 MM

CAMSHAFT
33MM CAMS / 33 MM

CAMSHAFT
34.5 mm cams / 34.50 MM

CAMSHAFT
35mm Cams / 35 MM

Pushrod Set Of Eight, Standard Length 256.7, Lw For 356 And 912
COMPLETE KIT FOR A VEHICLE

Bosch 6 volt ignition coil decal
6 VOLT

Einlass Decal, Orange With Black Lettering., Water Transfer
TRANSFER

Fram Oil Filter Side Decal-Large, Water Transfer
TRANSFER

Fram Oil Filter Top Cover Decal, Water Transfer
TRANSFER

H-Filter Einlass Black Lettered Oil Filter Canister Side Decal, Water Transfer
TRANSFER

H-Filter Oil Filter Canister Top Cover Decal, Water Transfer
TRANSFER

Mann Oil Filter Canister Decal Set, Water Transfer
TRANSFER