Left-hand drive 
$600.00
Neutek Camshaft Sx2 Street And Vintage Race Cam. for Porsche 356C • 1963 • 1600 C (616/15) • Cabrio C • Manual Gearbox, 4 Speed
Stoddard price list
$688.74
NLA 105 106 00
356C
1963 - 1600 C (616/15)
1
2.447 lbs
CAMSHAFT SX2 For higher level street and vintage racing. Best with Solex 40 P11-4 carbs. Good power 3500-6500 RPM
This camshaft is a new chilled-iron casting with lobes ground to specs to provide improved street performance for engines with Solex 40PII-4 Carburetors. This cam is recommended for SC/912 engines with 86mm Big Bore pistons and about 9.5:1 compression ratio. Note the high lift on the intakes.
Specifications are:
Duration:
261 degrees on exhaust
255 degrees on intake
Lift:
.375" on exhaust
.372" on intake
Lobe separation: 106.2 degrees.
All new camshafts should be installed along with new or re-ground tappets.
Motul break-in oil should be used for initial start-up. Then, switch over to Motul Classic Oil for normal driving.
This camshaft is a new chilled-iron casting with lobes ground to specs to provide improved street performance for engines with Solex 40PII-4 Carburetors. This cam is recommended for SC/912 engines with 86mm Big Bore pistons and about 9.5:1 compression ratio. Note the high lift on the intakes.
Specifications are:
Duration:
261 degrees on exhaust
255 degrees on intake
Lift:
.375" on exhaust
.372" on intake
Lobe separation: 106.2 degrees.
All new camshafts should be installed along with new or re-ground tappets.
Motul break-in oil should be used for initial start-up. Then, switch over to Motul Classic Oil for normal driving.
Estimate shipping costs for this part
The other parts in the family « Engine and fuel feed »
Genuine
Other diagrams in the family « Engine and fuel feed »
Recently viewed
Stoddard Proudly Distributes These Great Products
Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.