Neutek Camshaft SX1 for Porsche
Stoddard price list
$600.00
NLA 105 105 00
1
2.535 lbs
NLA-105-105-00 Neutek Camshaft SX1. Good for engines with big-bore kits and dual Weber or Solex carburetors.
This camshaft is a new chilled-iron casting with lobes ground to specs to provide improved street performance for engines with Solex 40PII-4 Carburetors. This cam is recommended for SC/912 engines with 86mm Big Bore pistons and about 9:1 compression ratio.
Specifications are:
Duration:
248 degrees on exhaust
244 degrees on intake
Lift:
.374" on exhaust
.442" on intake
Lobe separation: 108.2 degrees.
All new camshafts should be installed along with new or re-ground tappets.
Motul break-in oilshould be used for initial start-up. Then, switch over to Motul Classic Oil for normal driving.
This camshaft is a new chilled-iron casting with lobes ground to specs to provide improved street performance for engines with Solex 40PII-4 Carburetors. This cam is recommended for SC/912 engines with 86mm Big Bore pistons and about 9:1 compression ratio.
Specifications are:
Duration:
248 degrees on exhaust
244 degrees on intake
Lift:
.374" on exhaust
.442" on intake
Lobe separation: 108.2 degrees.
All new camshafts should be installed along with new or re-ground tappets.
Motul break-in oilshould be used for initial start-up. Then, switch over to Motul Classic Oil for normal driving.
Estimate shipping costs for this part
Stoddard Proudly Distributes These Great Products
Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.