Back

997 05-08

2005 • 997 C2S • Coupe • Manual Gearbox, 6 Speed

Left-hand drive

Choose another family of parts

Previous diagram

Next diagram

Diagram « PUMP / VALVE / SWITCHOVER VALVE / HOLDER » for 997 05-08 • 2005 • 997 C2S • Coupe • Manual Gearbox, 6 Speed

14 parts

1
SECONDARY PUMP
997 605 104 02 Genuine Usually ships in 4 business days

$1,633.22

Part details →
2
SCREW
955 113 325 00 Genuine Usually ships in 4 business days

$3.76

Recommended quantity: 2

Part details →
3
SUPPORT
2 versions Usually ships in 4 business days

From $6.40
Choose ›

2 Versions available for this part

Choose a version Part details →
4
RUBBER MOUNTING
999 703 868 40 Genuine Usually ships in 4 business days

$14.56

Recommended quantity: 3

Part details →
5
SPACER SLEEVE
999 209 077 01 Genuine Usually ships in 4 business days

$9.70

Recommended quantity: 2

Part details →
6
Change-Over Valve
7PP 906 270 Genuine Ship Tomorrow

$80.60

Part details →
7
BRACKET
997 113 137 01 Genuine Usually ships in 4 business days

$258.27

Part details →
8
VALVE
948 113 203 51 Genuine Usually ships in 4 business days

$277.21

Part details →
9
Gasket For Air Injection Valve
993 113 258 51 Genuine Ship Tomorrow

$16.45

Part details →
10
HOSE
997 113 339 02 Genuine Usually ships in 4 business days

$20.65

Part details →
11
GASKET
2 versions Usually ships in 4 business days

From $8.88
Choose ›

2 Versions available for this part

Choose a version Part details →
12
CONNECTING LINE
997 113 117 01 Genuine Usually ships in 4 business days

$246.03

Part details →
13
GASKET
996 113 213 51 Genuine Usually ships in 4 business days

$1.72

Part details →
14
COVER
997 113 340 00 Genuine Usually ships in 4 business days

$74.66

Part details →

In the same category

The other parts in the family « Engine and fuel feed »

See all products

Other diagrams in the family « Engine and fuel feed »

ENGINE CRANKCASE / IMPULSE GENERATOR / PINKING DETECTOR

SERVICE BELT PULLEY

CRANKSHAFT / BUSH / BELT / CONNECTING ROD / TWIN-WEIGHT ENGINE FLYWHEEL

PISTON / RING

CYLINDER HEAD / VALVE LIFTER / VALVE / HALL TRANSMITTER / OIL PRESSURE CONTACTOR / VALVE SPRING

INTERMEDIATE SHAFT / CAMSHAFT / CHAIN / SHOE / IDLER / PINION

OIL PUMP / TEMPERATURE SENSOR / HEAT EXCHANGER

ENGINE LUBRICATION

OIL SEPARATOR / PIPE / SEAL

WATER PUMP / WATER PUMP GASKET / THERMOSTAT

HEATING DUCT

ENGINE COOLING WATER PIPE PART 1

FEED AND RETURN WATER HOSE FOR FRONT RADIATOR

FRONT WATER RADIATOR / FRONT RADIATOR FAN / FRONT RADIATOR DUCT

EXPANSION VESSEL / EXPANSION VESSEL PLUG

AIR FILTER / FLOW METER

BUTTERFLY VALVE BODY

INJECTOR / INJECTION HARNESS

MANIFOLD / SLEEVE / TEMPERATURE SENSOR / VACUUM UNIT

PUMP / VALVE / SWITCHOVER VALVE / HOLDER

ENGINE SUPPORT / ENGINE SILENT BLOCK

TANK / PUMP / LEVEL SENSOR / TUBE

FRONT FUEL PIPE

FUEL PIPE FROM TANK TO ENGINE

EXHAUST SYSTEM EXCLUSIVE PROGRAMME SINGLE PARTS

GEARBOX CASING / CONTROL MODULE

GEARBOX SUPPORT

COVER / LOCK / BLOWER / HINGE / CABLE / SEAL

CONTROL UNITS

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

Engine and fuel feed

Diagram « PUMP / VALVE / SWITCHOVER VALVE / HOLDER » for 997 05-08 • 2005 • 997 C2S • Coupe • Manual Gearbox, 6 Speed

In the same category

Change-Over Valve

SECONDARY PUMP

VALVE

The other parts in the family « Engine and fuel feed »

ENGINE OIL DRAIN VALVE

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL 2 LITRES

STAINLESS STEEL OIL PAN DEFLECTOR KIT

Thermostat-12AN male

KN SPORT AIR FILTER

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

ENGINE OIL MOBIL1 0W40 1 LITRES

ENGINE OIL MOBIL1 0W40 5 LITRES

GULF FLAT OIL 4 - 6 5W50 4.5 LITRES

FUEL CAP PLASTIC

MAINTENANCE KIT - 997 C2S / C4S 2005-2008 (MODEL WITH OPTION X51)

TENSIONING ROLLER KIT

IMS BEARING REPLACEMENT TOOL KIT

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT FITTING ENTAILS REMOVAL OF THE ENGINE

MODIFICATION KIT FOR INTERMEDIATE SHAFT LUBRICATION

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

COMPLETE ENGINE GASKET KIT

GASKET SET

CONROD BEARINGS SET REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM

GENERATION EV1/EV6 INJECTOR CONNECTION KIT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT RIGHT

ENGINE OIL DRAIN VALVE

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL 2 LITRES

STAINLESS STEEL OIL PAN DEFLECTOR KIT

Thermostat-12AN male

KN SPORT AIR FILTER

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

ENGINE OIL MOBIL1 0W40 1 LITRES

ENGINE OIL MOBIL1 0W40 5 LITRES

GULF FLAT OIL 4 - 6 5W50 4.5 LITRES

FUEL CAP PLASTIC

MAINTENANCE KIT - 997 C2S / C4S 2005-2008 (MODEL WITH OPTION X51)

TENSIONING ROLLER KIT

IMS BEARING REPLACEMENT TOOL KIT

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT FITTING ENTAILS REMOVAL OF THE ENGINE

MODIFICATION KIT FOR INTERMEDIATE SHAFT LUBRICATION

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

COMPLETE ENGINE GASKET KIT

GASKET SET

CONROD BEARINGS SET REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET) CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM

GENERATION EV1/EV6 INJECTOR CONNECTION KIT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR FRONT RIGHT

Engine lubrication / oil cooling

ENGINE OIL DRAIN VALVE

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL 2 LITRES

STAINLESS STEEL OIL PAN DEFLECTOR KIT

Thermostat-12AN male

Inlet - filtration

KN SPORT AIR FILTER

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

Engine oil

ENGINE OIL MOBIL1 0W40 1 LITRES

ENGINE OIL MOBIL1 0W40 5 LITRES

GULF FLAT OIL 4 - 6 5W50 4.5 LITRES

Fuel filter / fuel pump / fuel accumulator...

FUEL CAP PLASTIC

Service kit

MAINTENANCE KIT - 997 C2S / C4S 2005-2008 (MODEL WITH OPTION X51)

Service belt pulley

TENSIONING ROLLER KIT

Intermediate shaft / aluminium pinion on i...

IMS BEARING REPLACEMENT TOOL KIT

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT

DEEP OIL PAN KIT 2 LITER STAINLESS STEEL
2 LITRES

ENGINE OIL MOBIL1 0W40
1 LITRES

ENGINE OIL MOBIL1 0W40
5 LITRES

GULF FLAT OIL 4 - 6 5W50
4.5 LITRES

FUEL CAP
PLASTIC

IMS INTERMEDIATE SHAFT REPAIR BEARING KIT
FITTING ENTAILS REMOVAL OF THE ENGINE

REPAIR KIT FOR INTERMEDIATE SHAFT BEARING IMS
CAN BE FITTED WITHOUT REMOVING THE ENGINE BUT IT REQUIRES SPECIAL TOOLS (P544966 FOR PURCHASE OR P544968 FOR HIRE)

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT

CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT LEFT

CSF ALUMINUM HIGH-PERFORMANCE RADIATOR
FRONT RIGHT