Back

911 Turbo + 965

1988 • 3.3 Turbo • Targa • Manual Gearbox, 4 Speed

Left-hand drive

Choose another family of parts

Previous diagram

Next diagram

Diagram « TARGA CABRIO REAR FENDER / REAR FENDER EXTENSION / BLISTER FRAME / ROLL BAR » for 911 Turbo + 965 • 1988 • 3.3 Turbo • Targa • Manual Gearbox, 4 Speed

6 parts

1
SCUTTLE
911 503 087 42 GRV Genuine Usually ships in 4 business days

$6,586.86

FOLD WIDTH 10 MM

Part details →
2
LINING BLACK
A 911 565 043 48 Stoddard Usually ships in 6 business days

$1,624.37

BLACK / BLACK

Part details →
3
Rear Center
2 versions Usually ships in 4 business days

From $295.57
Choose ›

2 Versions available for this part

Choose a version Part details →
4
Exterior Paneling Screw Plug 964
999 064 037 40 Genuine Ship Today (before 5:00pm)

$4.36

Recommended quantity: 4

Part details →
5
TAPPING SCREW
AN 013 957 5 Stoddard Usually ships in 6 business days

$1.70

SILVER / SILVER

Recommended quantity: 15

Part details →
6
WING JOINING PLATE
2 versions Usually ships in 4 business days

From $818.44
Choose ›

2 Versions available for this part

Choose a version Part details →

In the same category

The other parts in the family « Bodywork »

See all products

Other diagrams in the family « Bodywork »

FRAME CENTRE

FRAME REAR

FRONT WING / EXTERIOR ROCKER PANEL / FUEL FILTER HATCH / FRONT WING EXTENSION / WINDSHIELD BAY SEAL

REAR SPOILER

CENTRAL LOCKING SYSTEMS

GLOVE COMPARTMENT SUN VISORS

EXTERIOR SILL / SILL RUBBER / STONE GUARD / LOGO / HOOD BADGE / JACK CAP

TARGA LOGO / TARGA WING MOLDING

BATTERY CROSSBODY / FRONT PANEL / TANK SUPPORT / BUMPER SUPPORT

INNER SILL / FRONT AND REAR WHEEL ARCH / FRONT FENDER SUPPORT / JACK SUPPORT / DASHBOARD

REAR WHEEL ARCH / TARGA ROLL BAR

TARGA CABRIO REAR FENDER / REAR FENDER EXTENSION / BLISTER FRAME / ROLL BAR

FRONT BUMPER / FRONT BUMPER SEAL / FRONT BUMPER BRACKET

FRONT SKIRT / FRONT SPOILER / FRONT BUMPER BOOT

REAR BUMPER / REAR BUMPER BOOT / REAR BUMPER SEAL

LID FRONT

REAR HOOD / REAR HOOD GRILLE / REAR HOOD CYLINDER / REAR HOOD LOCK

DOOR SEAL / DOOR HANDLE / DOOR STOP / DOOR

UPPER DOOR STRIPS / WINDOW LATCH GASKET / DOOR U-JOINT / DOOR OPENING MECHANISM

WINDOW REGULATOR MECHANISM / WINDOW REGULATOR MOTOR

DOOR GLASS FRAME / DOOR RAIL

GLASS / WINDSHIELD / DOOR GLASS / REAR WINDOW

PEDAL FLOOR / DOOR THRESHOLD TRIM / CARPET CLIP

ROOF LINER / REAR TARGA ROOF SEAL + ROLL BAR TRIM

DOOR PANEL / WINDOW REGULATOR BUTTON / DROP-IN CAB / DOOR PANEL CLIP

EXTERIOR MIRROR / INTERIOR MIRROR / MIRROR GLASS / MIRROR BUTTON

TARGA ROOF / TARGA ROOF LOCK / TARGA ROOF TRIM

FRONT SEAL FOR TARGA OR CONVERTIBLE ROOF / UPPER WINDSHIELD COVERING

DASHBOARD BLOWER MOTOR / BLOWER UNIT

WINDOW REGULATOR / CONVERTIBLE / MIRROR / LOCKING CABLE HARNESS

DASHBOARD BUTTON

3RD STOP LIGHT

REAR INTERNAL SHEET METAL

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

Bodywork

Diagram « TARGA CABRIO REAR FENDER / REAR FENDER EXTENSION / BLISTER FRAME / ROLL BAR » for 911 Turbo + 965 • 1988 • 3.3 Turbo • Targa • Manual Gearbox, 4 Speed

In the same category

SCUTTLE FOLD WIDTH 10 MM

WING JOINING PLATE REAR LEFT

WING JOINING PLATE REAR RIGHT

LINING BLACK BLACK / BLACK

Windshield Frame And Cowl Repair Piece, Left, 911 912 1966-1989 FRONT LEFT

Windshield Frame And Cowl Repair Piece, Right 911 912 1965-89 FRONT RIGHT

The other parts in the family « Bodywork »

Hood Strut Bolt And Clip Set

CORNER STRUCTURE FOR LEFT FRONT WING

CORNER STRUCTURE FOR RIGHT FRONT WING

Fiber Fender Washer 5mm X 17mm 911 912 1969-89

SPEED NUT

TAPPING SCREW

WASHER

WASHER

FUEL FILLER TRAP HOUSING

Fender Joining Plate Right 911 1970-1989. Has Slots For Slip Nuts MOUNT WITH SHEET METAL SCREWS

Fender Joining Plate, Left 911 912 1970-1989. Has Slots For Slip Nuts MOUNT WITH SHEET METAL SCREWS / FRONT LEFT

Fender Joining Plate, Left, 911 912 1970-1989. MOUNT WITH SHEET METAL SCREWS / FRONT LEFT

Fender Joining Plate, Right, 911 912 1970-1989 MOUNT WITH SHEET METAL SCREWS

GROMMET

Rubber Drain Tube, For Headlight Bucket, Floor Pan, Etc. 356, 912, 911

Front Floor Pan Half, Revised Stamping With Correct Impressions. 911 912 930 1965-1986 FRONT

Front Floor Pan Half, With Correct Impressions For G50 Transmission. 911 1987-1989

HALF FLOOR LEFT

HALF FLOOR RIGHT

ONE-PIECE PASSENGER COMPARTMENT FLOOR

Rear Floor Pan Half 911 912 930 1974-89 REAR

Rear Floor Pan Half, For Early 911 912 1965-1973 REAR

SUPPORT ON WOOD PLANK FLOORING UNDER FRONT RIGHT-HAND SIDE CARPET

Floor Pan Outer Perimeter Repair Panel Right For 911 RIGHT

LEFT FLOOR EDGE, 911 65-89 LEFT

Inner Frame Rail / Torsion Tube Reinforcement Panel, Left 911 912 1965-89 REAR LEFT

Inner Frame Rail / Torsion Tube Reinforcement Panel, Right. 911 912 1965-89 REAR RIGHT

Outer Frame Repair Panel Skin, Left For 911 912 1965-1989 REAR LEFT

Outer Frame Repair Panel Skin, Right For 911 912 1965-1989 REAR RIGHT

Torsion Tube / Frame Rail Reinforcement Repair Panel, Left Inner 911 912 1965 To 1989 REAR LEFT

Torsion Tube / Frame Rail Reinforcement Repair Panel, Right Inner 911 912 1965 To 1989 REAR RIGHT

Outer Frame Repair Panel, Left, 911 912 1965-1989 REAR LEFT

Outer Frame Repair Panel, Right, 911 912 1965-1989 REAR RIGHT

REAR STRUT PLATE REAR LEFT

REAR STRUT PLATE REAR RIGHT

LONG FRONT UNDERBODY PANEL WITH CONTROL PEDAL FLOOR

SHORT FRONT UNDERBODY PLATE OPTION: AIR CONDITIONER (Option code: 559)

NUT TO BE WELDED ON UNDERBODY PLATE

CONTROL PEDAL FLOOR WITH PEDAL FIXING, 911

Front Crossmember Repair Panel. 911 912 1965-1989.

SEAT BELT FIXING LUG

SEAT BELT FIXING LUG ON TUNNEL

FRONT PART OF WHEEL ARCH FRONT LEFT

FRONT PART OF WHEEL ARCH FRONT RIGHT

Repair Panel Bottom Rear Of Front Inner Fender. Right Side. 911 912 1965-1989 RIGHT

Repair Panel For Bottom Rear Of Front Inner Fender. Left Side. 911 912 1965-1989 LEFT

LID PRIME COATED

Vin Plate Repair Panel

Hood Shock Bracket, Left For 911 912 1965-1989 FRONT LEFT

Right Hood Shock Bracket For 911 912 1965-1989 FRONT RIGHT

SCUTTLE

Windshield Frame And Cowl Repair Piece, Left, 911 912 1966-1989 FRONT LEFT

Windshield Frame And Cowl Repair Piece, Right 911 912 1965-89 FRONT RIGHT

FRONT BOOT COVER 911 74-89 RSR STYLE WITH PERFORATION FOR RSR TANK

COVER WARNING: THE QUALITY IS NOT PERFECT (SMALL DEFECTS IN CHROME OR PAINT OR IMPERFECTIONS) / ALUMINIUM / FRONT

REAR HOOD REINFORCED SHOCK MOUNTING KIT

Rear Engine Lid Latch And Lock Set. Yellow Zinc Finish For 911 912 1965-1989

DOOR HINGE COMPLETE KIT

Door Check W/ Hardware . 911 And 912 1970-1989.

Door handle set, Black including lock cylinders PAIR / NON COMPATIBLE AVEC VERROUILLAGE CENTRALISE / BLACK / BLACK

Door Handle Set, Plastic as original for 911R PAIR

DOOR HANDLE LEVER BLACK / BLACK

911 RACING CHROME RIGHT EXTERIOR DOOR HANDLE DRILLED HOLES DRILLED / CHROME / CHROME / RIGHT

Black door handle set, drilled for 911, 912 PAIR

BLACK LEFT EXTERIOR DOOR HANDLE 911 RACING DRILLED HOLES DRILLED / BLACK / BLACK / LEFT

BLACK RIGHT EXTERIOR DOOR HANDLE 911 RACING DRILLED HOLES DRILLED / BLACK / BLACK / RIGHT

CHROME LEFT EXTERIOR DOOR HANDLE 911 RACING DRILLED HOLES DRILLED / CHROME / CHROME / LEFT

COMPLETE LOCK KIT CONTAINING (TWO BLACK HANDLES + IGNITION SWITCH + GLOVE BOX LOCK + FRONT HOOD LOCK)

26MM WINDOW REGULATOR RACK PIVOT (PARALLEL PIVOT) 26 MM

PIVOT FOR WINDOW WINDER RACK 23 MM (CROSS-SHAPED PIVOT) 23 MM

SCUTTLE
FOLD WIDTH 10 MM

WING JOINING PLATE
REAR LEFT

WING JOINING PLATE
REAR RIGHT

LINING BLACK
BLACK / BLACK

Windshield Frame And Cowl Repair Piece, Left, 911 912 1966-1989
FRONT LEFT

Windshield Frame And Cowl Repair Piece, Right 911 912 1965-89
FRONT RIGHT

Fender Joining Plate Right 911 1970-1989. Has Slots For Slip Nuts
MOUNT WITH SHEET METAL SCREWS

Fender Joining Plate, Left 911 912 1970-1989. Has Slots For Slip Nuts
MOUNT WITH SHEET METAL SCREWS / FRONT LEFT

Fender Joining Plate, Left, 911 912 1970-1989.
MOUNT WITH SHEET METAL SCREWS / FRONT LEFT

Fender Joining Plate, Right, 911 912 1970-1989
MOUNT WITH SHEET METAL SCREWS

Front Floor Pan Half, Revised Stamping With Correct Impressions. 911 912 930 1965-1986
FRONT

HALF FLOOR
LEFT

HALF FLOOR
RIGHT

Rear Floor Pan Half 911 912 930 1974-89
REAR

Rear Floor Pan Half, For Early 911 912 1965-1973
REAR

Floor Pan Outer Perimeter Repair Panel Right For 911
RIGHT

LEFT FLOOR EDGE, 911 65-89
LEFT

Inner Frame Rail / Torsion Tube Reinforcement Panel, Left 911 912 1965-89
REAR LEFT

Inner Frame Rail / Torsion Tube Reinforcement Panel, Right. 911 912 1965-89
REAR RIGHT

Outer Frame Repair Panel Skin, Left For 911 912 1965-1989
REAR LEFT

Outer Frame Repair Panel Skin, Right For 911 912 1965-1989
REAR RIGHT

Torsion Tube / Frame Rail Reinforcement Repair Panel, Left Inner 911 912 1965 To 1989
REAR LEFT

Torsion Tube / Frame Rail Reinforcement Repair Panel, Right Inner 911 912 1965 To 1989
REAR RIGHT

Outer Frame Repair Panel, Left, 911 912 1965-1989
REAR LEFT

Outer Frame Repair Panel, Right, 911 912 1965-1989
REAR RIGHT

REAR STRUT PLATE
REAR LEFT

REAR STRUT PLATE
REAR RIGHT

SHORT FRONT UNDERBODY PLATE
OPTION: AIR CONDITIONER (Option code: 559)

FRONT PART OF WHEEL ARCH
FRONT LEFT

FRONT PART OF WHEEL ARCH
FRONT RIGHT

Repair Panel Bottom Rear Of Front Inner Fender. Right Side. 911 912 1965-1989
RIGHT

Repair Panel For Bottom Rear Of Front Inner Fender. Left Side. 911 912 1965-1989
LEFT

Hood Shock Bracket, Left For 911 912 1965-1989
FRONT LEFT

Right Hood Shock Bracket For 911 912 1965-1989
FRONT RIGHT

Windshield Frame And Cowl Repair Piece, Left, 911 912 1966-1989
FRONT LEFT

Windshield Frame And Cowl Repair Piece, Right 911 912 1965-89
FRONT RIGHT

COVER
WARNING: THE QUALITY IS NOT PERFECT (SMALL DEFECTS IN CHROME OR PAINT OR IMPERFECTIONS) / ALUMINIUM / FRONT

DOOR HINGE
COMPLETE KIT

Door handle set, Black including lock cylinders
PAIR / NON COMPATIBLE AVEC VERROUILLAGE CENTRALISE / BLACK / BLACK

Door Handle Set, Plastic as original for 911R
PAIR

DOOR HANDLE LEVER
BLACK / BLACK

911 RACING CHROME RIGHT EXTERIOR DOOR HANDLE DRILLED
HOLES DRILLED / CHROME / CHROME / RIGHT

Black door handle set, drilled for 911, 912
PAIR

BLACK LEFT EXTERIOR DOOR HANDLE 911 RACING DRILLED
HOLES DRILLED / BLACK / BLACK / LEFT

BLACK RIGHT EXTERIOR DOOR HANDLE 911 RACING DRILLED
HOLES DRILLED / BLACK / BLACK / RIGHT

CHROME LEFT EXTERIOR DOOR HANDLE 911 RACING DRILLED
HOLES DRILLED / CHROME / CHROME / LEFT

26MM WINDOW REGULATOR RACK PIVOT (PARALLEL PIVOT)
26 MM

PIVOT FOR WINDOW WINDER RACK 23 MM (CROSS-SHAPED PIVOT)
23 MM

PIVOT FOR WINDOW WINDER RACK 23 MM (PARALLEL PIVOT)
23 MM

PIVOT FOR WINDOW WINDER RACK 26 MM (CROSS-SHAPED PIVOT)
26 MM

Door Panel Fiberboard Set For 911 912 964 1974-1994
PAIR

Door Skin, Left for 911 912 1965-1989
WITHOUT HOLE FOR REAR VIEW MIRROR (can be used for manual or electric rear view mirror) / Adaptive / LEFT / adaptable

Door Skin, Left For 911 912 1965-1989.
WITHOUT HOLE FOR REAR VIEW MIRROR (can be used for manual or electric rear view mirror) / Original Mounting / LEFT / montage origine

Door Skin, Left, 911 1965-1989
WITHOUT HOLE FOR REAR VIEW MIRROR (can be used for manual or electric rear view mirror) / Adaptive / LEFT / adaptable

Door Skin, Right For 911 912 1965-1989.
WITHOUT HOLE FOR REAR VIEW MIRROR (can be used for manual or electric rear view mirror) / RIGHT / montage origine

Door Skin, Right for 911 912 1965-89
WITHOUT HOLE FOR REAR VIEW MIRROR (can be used for manual or electric rear view mirror) / RIGHT / adaptable

EXTERIOR DOOR SKIN
WITH HOLE FOR REAR VIEW MIRROR (FOR ELECTRIC REAR VIEW MIRROR) / LEFT / montage origine

EXTERIOR DOOR SKIN
WITH HOLE FOR REAR VIEW MIRROR (FOR ELECTRIC REAR VIEW MIRROR) / RIGHT / montage origine

DOOR PANEL
ALUMINIUM / LEFT

DOOR PANEL
ALUMINIUM / RIGHT

Door Bottom Repair Panel, Left, 911 912 1965-1989
LEFT

Door Bottom Repair Panel, Right, 911 912 1965-1989
RIGHT

Door Skin Bottom Repair Panel Left. 911 65-89
LEFT

Door Skin Bottom Repair Panel Right. 911 65-89
RIGHT

911 DOOR HOLE AND BODYWORK PLUG AS ORIGINALLY MADE, DIAMETER 19 MM THICKNESS 5.5 MM (FOR HOLE WITH DOUBLE PLATE)
19 X 5.5 MM

Round Rubber Plug At Door For 911/912. Revised Die With Improved Profile
19 X 3 MM

BASE OF REAR WING (PART BETWEEN ROCKER COVER AND START OF WING)
RIGHT

REAR WING BASE (PART BETWEEN ROCKER PANEL AND START OF WING)
LEFT

Inner Longitudinal Repair Panel, Left For 911 912 1965-1973
LEFT

Inner Longitudinal Repair Panel, Right, 911 912 1965-1973
RIGHT

Inner Seat Rail Support, Left, 911 912 1965-1973
LEFT

Inner Seat Rail Support, Right, 911 912 1965-1973
RIGHT

A-Pillar Hinge Post Bottom Repair Panel, Left For 911 912 1965-1989
RIGHT

A-Pillar Hinge Post Bottom Repair Panel, Right For 911 912 1965-1968
LEFT

PART FOR REPAIRING LOWER FRONT LEFT ANGLE OF DOOR SEAL SUPPORT, 911 65-89
FRONT LEFT

PART FOR REPAIRING LOWER FRONT RIGHT ANGLE OF DOOR SEAL SUPPORT, 911 65-89
FRONT RIGHT

PART FOR REPAIRING LOWER LEFT DOOR SILL, 911 65-89
LEFT

PART FOR REPAIRING LOWER RIGHT DOOR SILL, 911 65-89
RIGHT

Rocker Flange Support, Front, Left, For 911 912 1965-1989
LEFT

Rocker Flange Support, Front, Right, For 911 912 1965-1989
RIGHT