Toggle Nav

Authentic Restoration Parts For Your Porsche ... Since 1957

  • Order Online or Call:
  • East Coast:(800) ­342 ­1414
  • West Coast:(800) ­438 ­8119
  • International: (440) 869 9890
Search
Advanced Search
  • Compare Products
Menu
Account
  • Home
  • Search results for: 'Plate+Below+Pulley+For+All+356++screws'

Search results for: 'Plate+Below+Pulley+For+All+356++screws'

View as Grid List

Items 1-80 of 7102

Page
per page
Set Ascending Direction
  1. 616-106-083-00 Plate Below Pulley For All 356 1965-69.
    616-106-083-00 Plate Below Pulley For All 356 1965-69.
    $80.10
    Add to Wish List
  2. 616-106-812-00 Engine Tin Cover Plate Below Crankshaft Pulley
    616-106-812-00 Engine Tin Cover Plate Below Crankshaft Pulley
    $135.69
    Add to Wish List
  3. 539-06-639 Engine Tin Cover Plate, Left Rear (Pulley Side) for All 356 and 912.
    539-06-639 Engine Tin Cover Plate, Left Rear (Pulley Side) for All 356 and 912.
    $328.70
    Add to Wish List
  4. NLA-09-SET Generator Pulley Set, Correct Silver Finish. For all 356 and early 912
    NLA-09-SET Generator Pulley Set, Correct Silver Finish. For all 356 and early 912
    $45.00
    Add to Wish List
  5. 616-106-812-00-RF Engine Tin Cover Plate Below Crankshaft Pulley Restored Factory original
    616-106-812-00-RF Engine Tin Cover Plate Below Crankshaft Pulley Restored Factory original
    $30.00
    Add to Wish List
  6. 539-06-639-RF Engine Tin Cover Plate, Left Rear (Pulley Side) for All 356 and 912 53906639. Restored Factory Part
    539-06-639-RF Engine Tin Cover Plate, Left Rear (Pulley Side) for All 356 and 912 53906639. Restored Factory Part
    $75.00
    Add to Wish List
  7. 539-02-112 Crank Pulley Bolt,fits all 356 and 912
    539-02-112 Crank Pulley Bolt,fits all 356 and 912
    $48.95
    Add to Wish List
  8. 616-102-163-01 Crank Pulley Sealing Washer, Fits All 356 and 912
    616-102-163-01 Crank Pulley Sealing Washer, Fits All 356 and 912
    $4.85
    Add to Wish List
  9. T55-100-730 Oil Seal Installer, Pulley End, for All 356 912 engines
    T55-100-730 Oil Seal Installer, Pulley End, for All 356 912 engines
    $122.85
    Add to Wish List
  10. 539-06-640 Engine Tin Cover Plate, Right Rear (Pulley Side) for 356 and 912
    539-06-640 Engine Tin Cover Plate, Right Rear (Pulley Side) for 356 and 912
    $328.70
    Add to Wish List
  11. SIC-102-991-89 Speedi Sleeve for Crank Pulley Sealing Surface. Solves Sealing Issues from Wear Grooves on Pulley. Fits All 356 and 912 up to 1969.
    SIC-102-991-89 Speedi Sleeve for Crank Pulley Sealing Surface. Solves Sealing Issues from Wear Grooves on Pulley. Fits All 356 and 912 up to 1969.
    $60.30
    Add to Wish List
  12. NLA-09-316 Outer Pulley, Silver for 356
    NLA-09-316 Outer Pulley, Silver for 356
    $10.00
    Add to Wish List
  13. 644-025-171-00 Clamp for Tire Strap Black With screws Fits all 356
    644-025-171-00 Clamp for Tire Strap Black With screws Fits all 356
    $16.75
    Add to Wish List
  14. NLA-02-113 4-hole Crank Pulley for all 356A, 356B, 356C, and 912 53902113
    NLA-02-113 4-hole Crank Pulley for all 356A, 356B, 356C, and 912 53902113
    $379.00
    Add to Wish List
  15. N-012-709-1 Woodruff Key for Pulley, fits 356, 912 and 914.
    N-012-709-1 Woodruff Key for Pulley, fits 356, 912 and 914.
    $2.62
    Add to Wish List
  16. 369-06-141 Right Side Cover Plate for All 356
    369-06-141 Right Side Cover Plate for All 356
    $76.00
    Add to Wish List
  17. 356-24-408 Rubber Boot For Heater Cable - All 356
    356-24-408 Rubber Boot For Heater Cable - All 356
    $5.55
    Add to Wish List
  18. NLA-113-012-50 Viton Oil Seal for Crankshaft. Pulley End for 356 and 912
    NLA-113-012-50 Viton Oil Seal for Crankshaft. Pulley End for 356 and 912
    $11.50
    Add to Wish List
  19. NLA-09-315 Inner Generator Pulley Half for 356. Silver Finish
    NLA-09-315 Inner Generator Pulley Half for 356. Silver Finish
    $12.00
    Add to Wish List
  20. 999-113-012-50 Pulley End Oil Seal for 356 and 912.
    999-113-012-50 Pulley End Oil Seal for 356 and 912.
    $9.00
    Add to Wish List
  21. 547-09-304 Generator Pulley Hub Fits 356 and 912.
    547-09-304 Generator Pulley Hub Fits 356 and 912.
    $33.50
    Add to Wish List
  22. 356-24-012 Gear Shift Mounting Bracket Plate for 356 Pre-A
    356-24-012 Gear Shift Mounting Bracket Plate for 356 Pre-A
    $50.00
    Add to Wish List
  23. 356-34-401 Rear Hub Spacer for All 356 w/ Drum Brake
    356-34-401 Rear Hub Spacer for All 356 w/ Drum Brake
    $30.00
    Add to Wish List
  24. NLA-571-002-03 Generator Inner Pulley Holding Wrench for 356 and 912
    NLA-571-002-03 Generator Inner Pulley Holding Wrench for 356 and 912
    $11.95
    Add to Wish List
  25. T55-100-NUT Nut Use With T55-100-730 Pulley Seal Installer. Fits 356/912 Pulley End of Crank
    T55-100-NUT Nut Use With T55-100-730 Pulley Seal Installer. Fits 356/912 Pulley End of Crank
    $1.90
    Add to Wish List
  26. T55-100-BOL Bolt, Use With T55-100-730 Pulley Seal Installer. Fits 356/912 Pulley End of Crank
    T55-100-BOL Bolt, Use With T55-100-730 Pulley Seal Installer. Fits 356/912 Pulley End of Crank
    $4.40
    Add to Wish List
  27. NLA-62-014 Headlight Lens Assembly with Mounting Screws at 4 and 8 O'Clock for All 356
    NLA-62-014 Headlight Lens Assembly with Mounting Screws at 4 and 8 O'Clock for All 356
    $177.45
    Add to Wish List
  28. 356-42-114 Adjusting Screw Fits 356
    356-42-114 Adjusting Screw Fits 356
    $29.73
    Add to Wish List
  29. 539-01-115 Main Bearing Set Screw-Set screw for bearing #4, fits all 356 and 912
    539-01-115 Main Bearing Set Screw-Set screw for bearing #4, fits all 356 and 912
    $18.85
    Add to Wish List
  30. NLA-552-531-00 Vinyl Garnish Rail Cover on door top and below quarter window, 4 piece set, vinyl. Fits all 356 Coupe
    NLA-552-531-00 Vinyl Garnish Rail Cover on door top and below quarter window, 4 piece set, vinyl. Fits all 356 Coupe
    $130.00
    Add to Wish List
  31. 616-106-831-00 Engine Tin Plate Under Fuel Pump for All 356
    616-106-831-00 Engine Tin Plate Under Fuel Pump for All 356
    $127.18
    Add to Wish List
  32. 546-06-203 Pulley Washer, 3.5mm thick, for 356 and 912 with 350W generator 54606203
    546-06-203 Pulley Washer, 3.5mm thick, for 356 and 912 with 350W generator 54606203
    $14.50
    Add to Wish List
  33. 369-06-139 Engine Compartment Seal for Pulley End Sheet Metal Tray. Fits 356
    369-06-139 Engine Compartment Seal for Pulley End Sheet Metal Tray. Fits 356
    $80.00
    Add to Wish List
  34. 911-102-017-50 V-belt Pulley fits all 911 models from 1965-1977.Also fits 914-6 models
    911-102-017-50 V-belt Pulley fits all 911 models from 1965-1977.Also fits 914-6 models
    $212.50
    Add to Wish List
  35. 356-41-444 Protection Cap Washer for Front Axle, 2 Req'd, All 356 1950-1965
    356-41-444 Protection Cap Washer for Front Axle, 2 Req'd, All 356 1950-1965
    $0.75
    Add to Wish List
  36. 369-06-119 Cover Plate at Flywheel for All 356 with USA Heating
    369-06-119 Cover Plate at Flywheel for All 356 with USA Heating
    $304.50
    Add to Wish List
  37. 356-51-229 B Pillar Longitudinal Vertical Reinforcing Panel, Left Hand. Fits All 356
    356-51-229 B Pillar Longitudinal Vertical Reinforcing Panel, Left Hand. Fits All 356
    $51.35
    Add to Wish List
  38. 356-51-230 B Pillar Longitudinal Vertical Reinforcing Panel, Right Hand. Fits All 356
    356-51-230 B Pillar Longitudinal Vertical Reinforcing Panel, Right Hand. Fits All 356
    $56.20
    Add to Wish List
  39. 539-09-316 Outer Generator Pulley Half, Gold Finish, Fits 356 and 912.
    539-09-316 Outer Generator Pulley Half, Gold Finish, Fits 356 and 912.
    $19.00
    Add to Wish List
  40. 539-09-314 Generator Pulley Shim Fits 356 and 912
    539-09-314 Generator Pulley Shim Fits 356 and 912
    $3.75
    Add to Wish List
  41. 547-09-303 Generator Pulley Nut Fits 356 and 912.
    547-09-303 Generator Pulley Nut Fits 356 and 912.
    $34.75
    Add to Wish List
  42. 356-51-231 B Pillar Inner Fender Longitudinal Reinforcing Panel, Left Hand, Fits All 356
    356-51-231 B Pillar Inner Fender Longitudinal Reinforcing Panel, Left Hand, Fits All 356
    $33.35
    Add to Wish List
  43. 356-51-232 B Pillar Inner Fender Longitudinal Reinforcing Panel, Right Hand, Fits All 356
    356-51-232 B Pillar Inner Fender Longitudinal Reinforcing Panel, Right Hand, Fits All 356
    $35.00
    Add to Wish List
  44. 690-321-232-00 Fulcrum Plate for rear axle shaft, 4 required, Fits all 356.
    690-321-232-00 Fulcrum Plate for rear axle shaft, 4 required, Fits all 356.
    $160.00
    Add to Wish List
  45. NLA-542-002-00 Screw Set for Aluminum Holding Rail. Fits all 356 Cabriolet
    NLA-542-002-00 Screw Set for Aluminum Holding Rail. Fits all 356 Cabriolet
    $6.50
    Add to Wish List
  46. NLA-531-004-00 Door Post Hinge Cover Screw Set Fits all 356
    NLA-531-004-00 Door Post Hinge Cover Screw Set Fits all 356
    $2.00
    Add to Wish List
  47. NLA-602-102-01 Distributor Point Plate Sliding Surface for Advance Weights for all 356 and 912
    NLA-602-102-01 Distributor Point Plate Sliding Surface for Advance Weights for all 356 and 912
    $6.05
    Add to Wish List
  48. 356-41-452 Lock Plate For Axle Nuts, 2 req'd. Fits 356, 356A (W/Early Spindle)
    356-41-452 Lock Plate For Axle Nuts, 2 req'd. Fits 356, 356A (W/Early Spindle)
    $2.50
    Add to Wish List
  49. 644-34-191-1 Split Axle Boot with clamps and screws, 2 required per car, Fits all 356
    644-34-191-1 Split Axle Boot with clamps and screws, 2 required per car, Fits all 356
    $14.80
    Add to Wish List
  50. 356-41-446 Link Pin Shim .5MM up to 36 Req'd, All 356 1950-1965
    356-41-446 Link Pin Shim .5MM up to 36 Req'd, All 356 1950-1965
    $2.40
    Add to Wish List
  51. 356-49-713 Door Hinge Reinforcing Plate, Left Hand. Fits 356 Pre-A 1950-1951
    356-49-713 Door Hinge Reinforcing Plate, Left Hand. Fits 356 Pre-A 1950-1951
    $8.00
    Add to Wish List
  52. 356-49-714 Door Hinge Reinforcing Plate, Right Hand. Fits 356 Pre-A 1950-1951
    356-49-714 Door Hinge Reinforcing Plate, Right Hand. Fits 356 Pre-A 1950-1951
    $8.00
    Add to Wish List
  53. 356-52-206 Type-1 Door Striker Plate, Works for Left or Right, Fits 356 Pre-A and 356A Pre-T2
    356-52-206 Type-1 Door Striker Plate, Works for Left or Right, Fits 356 Pre-A and 356A Pre-T2
    $49.35
    Add to Wish List
  54. 999-039-001-00 Cam Gear Bolt Locking Plate fits all 356 and 912.
    999-039-001-00 Cam Gear Bolt Locking Plate fits all 356 and 912.
    $5.50
    Add to Wish List
  55. 356-34-410 Rear Axle Shim Washer for Drum Brake Cars. 62.00x71.50 x 0.10 Quantity as required. Fits all 356, 1950 thru 1963.
    356-34-410 Rear Axle Shim Washer for Drum Brake Cars. 62.00x71.50 x 0.10 Quantity as required. Fits all 356, 1950 thru 1963.
    $5.00
    Add to Wish List
  56. 900-147-001-40 Countersunk-Head Screw 8 X 40 For Door Striker Plate. Fits 356
    900-147-001-40 Countersunk-Head Screw 8 X 40 For Door Striker Plate. Fits 356
    $1.20
    Add to Wish List
  57. 356-34-143 Transmission Hex Gasket at Axle Housing. 0.3mm thick. All 356 Types 1950-1965
    356-34-143 Transmission Hex Gasket at Axle Housing. 0.3mm thick. All 356 Types 1950-1965
    $3.65
    Add to Wish List
  58. 356-49-404-01 Cover Plate For Gear Shift Mount Bolt on Floor Pan. Fits 356 Pre-A 1950-1951
    356-49-404-01 Cover Plate For Gear Shift Mount Bolt on Floor Pan. Fits 356 Pre-A 1950-1951
    $12.70
    Add to Wish List
  59. 356-49-404 Circular Cover Plate Under Battery and on Tunnel Fits 356 Pre-A 1950-1951
    356-49-404 Circular Cover Plate Under Battery and on Tunnel Fits 356 Pre-A 1950-1951
    $18.85
    Add to Wish List
  60. SIC-102-991-14 Speedi Sleeve for Crank Pulley Sealing Surface. Solves Sealing Issues from Wear Grooves on Pulley. Fits 911 1965-98
    SIC-102-991-14 Speedi Sleeve for Crank Pulley Sealing Surface. Solves Sealing Issues from Wear Grooves on Pulley. Fits 911 1965-98
    $47.00
    Add to Wish List
  61. 928-106-113-02 Fan Pulley for 928, 1978-1986
    928-106-113-02 Fan Pulley for 928, 1978-1986
    $105.92
    Add to Wish List
  62. NLA-635-004-00 12V Horn Data Plate Set for 345Hz and 390Hz plates and screws
    NLA-635-004-00 12V Horn Data Plate Set for 345Hz and 390Hz plates and screws
    $30.00
    Add to Wish List
  63. 911-106-208-03 Alternator Pulley, Outer Half, for 911
    911-106-208-03 Alternator Pulley, Outer Half, for 911
    $136.90
    Add to Wish List
  64. 959-102-018-00 Pulley 95910201800
    959-102-018-00 Pulley 95910201800
    $1,720.92
    Add to Wish List
  65. 644-504-741-00 Transmission Carrier Mount Bolt Cover Plate, Left Hand. Fits all 356
    644-504-741-00 Transmission Carrier Mount Bolt Cover Plate, Left Hand. Fits all 356
    $25.00
    Add to Wish List
  66. 644-504-742-00 Transmission Carrier Mount Bolt Cover Plate, Right Hand. Fits all 356
    644-504-742-00 Transmission Carrier Mount Bolt Cover Plate, Right Hand. Fits all 356
    $25.00
    Add to Wish List
  67. 900-145-012-02 4.2 x 32 Screw For Rear Roadster Trim Fits All 356
    900-145-012-02 4.2 x 32 Screw For Rear Roadster Trim Fits All 356
    $0.10
    Add to Wish List
  68. 997-603-154-00 Pulley
    997-603-154-00 Pulley
    $60.00
    Add to Wish List
  69. 356-52-807-SET Door Seal Set, Left and Right. Concours Correct for All 356 Coupe. Made from NOS Profile in Europe.
    356-52-807-SET Door Seal Set, Left and Right. Concours Correct for All 356 Coupe. Made from NOS Profile in Europe.
    $210.00
    Add to Wish List
  70. NLA-501-059-00 Floor Pan Perimeter Kit for All 356
    NLA-501-059-00 Floor Pan Perimeter Kit for All 356
    $58.80
    Add to Wish List
  71. NLA-100-917-00 Throttle Plate Screw for Solex Carburetors.
    NLA-100-917-00 Throttle Plate Screw for Solex Carburetors.
    $6.00
    Add to Wish List
  72. 900-145-002-02 Screw 3 x 10 For Cover Plate Hinge 356 50-65 911 / 912 65-69
    900-145-002-02 Screw 3 x 10 For Cover Plate Hinge 356 50-65 911 / 912 65-69
    $0.40
    Add to Wish List
  73. 993-106-268-01 Alternator Pulley Half for 993 1995-1998
    993-106-268-01 Alternator Pulley Half for 993 1995-1998
    $61.87
    Add to Wish List
  74. 999-571-047-02 Alternator Fan Pulley Wrench for 911 1977-1989
    999-571-047-02 Alternator Fan Pulley Wrench for 911 1977-1989
    $76.96
    Add to Wish List
  75. 616-106-201-00 Pulley Hub for 912 with 420W Generator 61610620100
    616-106-201-00 Pulley Hub for 912 with 420W Generator 61610620100
    $38.24
    Add to Wish List
  76. 021-105-247-A Crankshaft Seal at Pulley End for 914-4
    021-105-247-A Crankshaft Seal at Pulley End for 914-4
    $7.59
    Add to Wish List
  77. 964-106-267-00 Fan Pulley Half for 911 964 1989-1994
    964-106-267-00 Fan Pulley Half for 911 964 1989-1994
    $118.35
    Add to Wish List
  78. 930-106-124-02 Engine Fan Pulley for 911 1989-1994 964
    930-106-124-02 Engine Fan Pulley for 911 1989-1994 964
    $188.74
    Add to Wish List
  79. NLA-531-003-00 Stainless Door Panel Screw and Washer Set. one kit per car. Fits all 356
    NLA-531-003-00 Stainless Door Panel Screw and Washer Set. one kit per car. Fits all 356
    $42.00
    Add to Wish List
  80. T26-571-002-00 Generator and Fan Pulley Wrench Black for 356A 356B
    T26-571-002-00 Generator and Fan Pulley Wrench Black for 356A 356B
    $17.95
    Add to Wish List
View as Grid List

Items 1-80 of 7102

Page
per page
Set Ascending Direction
© 2025 Stoddard NLA LLC. All Rights Reserved.