Back

911 78-83

1978 • 3.0Sc • Coupe • Manual Gearbox, 5 Speed

Left-hand drive

Cylinder Base Gasket .25mm for Porsche 911 78-83 • 1978 • 3.0Sc • Coupe • Manual Gearbox, 5 Speed

Detailed list of available versions

Use the filters below to narrow down the list of relevant parts displayed on the right-hand side of the screen.

Dimension

0.25 MM 1 part(s) 0.50 MM 1 part(s)

Manufacturer

Genuine 2 part(s)

Availability

Usually ships in 4 business days 2 part(s)

5 peripheral parts in the diagram « PISTONS / CYLINDER RINGS / CYLINDER BASE GASKET / CYLINDER HEAD GASKET »

5 parts

1
CYLINDER WITH PISTONS
A 930 103 962 05 Usually ships in 6 business days

$4,691.32

188 HORSEPOWER

Part details →
2
SET OF RINGS FOR A PISTON
A 930 103 963 00 Usually ships in 6 business days

$24.28

Recommended quantity: 6

Part details →
3
SNAP RING
N 012 278 1 Genuine Usually ships in 4 business days

$2.25

Recommended quantity: 12

Shown 2× on this diagram

Part details →
4
Cylinder Base Gasket .25mm
2 versions Usually ships in 4 business days

From $14.55
Choose ›

2 Versions available for this part

Choose a version Part details →
5
CE-SEAL RING
930 104 317 01 Genuine Usually ships in 4 business days

$43.09

Recommended quantity: 6

Part details →

In the same category

The other parts in the family « Engine and fuel feed »

See all products

Other diagrams in the family « Engine and fuel feed »

PISTONS CYLINDERS / RING / VALVE / VALVE GUIDE / VALVE SPRING / CYLINDER HEAD GASKET

LEFT CRANKCASE / STRIP GASKET / OIL RETURN TUBE / DILAVAR STUD / BREATHER GASKET

RIGHT CRANKCASE / FLYWHEEL SEAL / OIL PRESSURE SENSOR / ENGINE OIL THERMOSTAT / OIL PRESSURE SWITCH

CRANKSHAFT / FLYWHEEL / BEARING / CONNECTING ROD BOLT / CONNECTING ROD / PULLEY

PISTONS / CYLINDER RINGS / CYLINDER BASE GASKET / CYLINDER HEAD GASKET

CYLINDER HEAD / VALVE / VALVE SPRINGS / VALVE GUIDE / CYLINDER HEAD STUD / CYLINDER HEAD NUT

ROCKER COVER GASKET / TIMING COVER GASKET / TIMING COVER

TIMING CHAIN / TIMING SPROCKET / ROCKER GEAR / CHAIN TENSIONER

INTERMEDIATE SHAFT / ALUMINUM PINION FOR INTERMEDIATE SHAFT / PINION FOR INTERMEDIATE SHAFT / BEARING FOR INTERMEDIATE SHAFT

OIL HOSE / OIL TANK / OIL FILTER / TIMING HOSE / OIL PUMP / OIL COOLER

ASSEMBLY WITH FRONT OIL RADIATOR - OIL HOSE - THERMOSTAT - FRONT OIL RADIATOR

ALTERNATOR BELT / ALTERNATOR / ENGINE COOLING BLOWER / ALTERNATOR PULLEY

AIR DUCT

ENGINE SHEET METAL - CYLINDER SHEET METAL

AIR FILTER / INTAKE HOUSING / INTAKE GASKET

DOSING DISPENSER / ADMISSION TRAY

INTAKE MANIFOLD / INTAKE TUBING / INJECTOR / GASKET / PIPE / AIR CONTROL

AIR INJECTION

ENGINE BLOWER / ENGINE HEATER DUCT

ENGINE SUPPORT CROSSBODY / ENGINE BLOCK SILENT

FUEL PUMP / FUEL TANK / FUEL LEVEL SENSOR

FUEL PUMP / FUEL FILTER / FUEL PRESSURE ACCUMULATOR / FUEL HOSE

TANK VENTILATION

GEARBOX BUSHING / GEARBOX CROSS-MEMBER

CAR SPACE SOUNDPROOFING

YORK COMPRESSOR MOUNTING AND DRIVING MECHANISM

TRUNK WIRING HARNESS / FOG LIGHT / HEADLIGHT AND HORN / LIGHTING

REAR LIGHT WIRE HARNESS / ENGINE LIGHT / PLATE LIGHT

HEADLIGHT WASHER WIRING HARNESS / HAZARD LIGHTS / FUEL PUMP

FUEL LEVEL SENSOR / OIL LEVEL SENSOR / RELAY / HORN

CRUISE CONTROL

EMISSIONS COUNTER SWITCH

EXHAUST TEMPERATURE SENSOR INDICATOR LAMP

URETHANE RESILIENT MOUNT FOR SUSPENSION

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

Cylinder Base Gasket .25mm for Porsche 911 78-83 • 1978 • 3.0Sc • Coupe • Manual Gearbox, 5 Speed

Detailed list of available versions

Dimension

Manufacturer

Availability

Cylinder Base Gasket .25mm 0.25 MM

CYLINDER BASE GASKET 0.50 MM

5 peripheral parts in the diagram « PISTONS / CYLINDER RINGS / CYLINDER BASE GASKET / CYLINDER HEAD GASKET »

In the same category

CYLINDER BASE GASKET 0.50 MM

Cylinder Base Gasket .25mm 0.25 MM

The other parts in the family « Engine and fuel feed »

Backfire Pressure Relief Valve All Cis Cars

TOOL FOR FITTING OVERPRESSURE RELIEF VALVE ON INLET CASING

Mahle Oil Filter For 911 964 1972-1994

Red Oil Filter . Purolator Micronic. Pc260 911 964 1972-1994 RED OIL FILTER AS ORIGINALLY MOUNTED

Oil Change Kit For 911 1972-1994

ENGINE OIL DRAIN VALVE 22 x1.5 MM

Anti-Drain Back Valve For 911 1972-1989

SET OF 4 REINFORCED OIL RETURN TUBES, 911 65-94 ENHANCED COOLING SET OF 4

TELESCOPIC ALUMINIUM OIL RETURN TUBE SET OF 4 SET OF 4

TELESCOPIC ALUMINIUM OIL RETURN TUBE, SOLD INDIVIDUALLY, 911 65-98 ONE

O-Ring 911 930 964 993 1965-1998 20,22x3,53n CENTRAL

O-Ring For O.E. Oil Return Tubes EXTERIOR

TELESCOPIC OIL RETURN KILL CIRCLIPS

911 78-89 OIL PRESSURE VALVE KIT ON RIGHT ENGINE CRANKCASE

OIL PRESSURE VALVE KIT 911 74-98 ON LEFT ENGINE CRANKCASE

NUT TO HOLD THERMOSTAT 911

OIL GALLERY UPPER

OIL GALLERY LOWER

REMOVAL OF ENGINE THERMOSTAT

CSF FRONT ALUMINUM HIGH-PERFORMANCE OIL COOLER 911 STYLE RS 73 61X 13 X 5 CENTIMETRE

FRONT OIL COOLER 911 2.8RSR

FRONT OIL COOLER 911 3.0 RSR

FRONT OIL COOLER 911 3.0 RSR

FRONT OIL COOLER 914/6GT

Oil Cooler Kit to Replace Trombone 911

Oil cooler, tube style 911/930

Thermostat-12AN male

ACT RIGHT LUBRICATION HOSE 911 74-83 FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

Cam Feed Line, Right Side. 1983 (late)-1989. FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

Camshaft Oil Feed Line, Left, . 911 1965-1983 FOR ASSEMBLY WITH MECHANICAL CHAIN IDLER / LEFT

Camshaft Oil Feed Line, Left, 911 1965 (from Eng.#903070)-1983/early. FOR ASSEMBLY WITH MECHANICAL CHAIN IDLER / LEFT

Camshaft Oil Line 911 1978-86 FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / LEFT

Camshaft Oil Line. 1983 (late)-1989. FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / LEFT

Metal Oil Feed Line, Left.911 1983 (late)-1989.

OIL HOSE FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

Oil Line To Camshaft Carrier For 911 1978-89 FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

45 Degree Elbow For Large 30mm Oil Lines

90 Degree Elbow For Large 30mm Oil Hoses For All 911

Cohline Hose Ferrule 20mm Id With 14mm Opening. 8012000

Cohline Oil Breather Hose 2620 22mm Price Is Per Meter SOLD BY THE METRE

Double Male Coupler 911 1978-89 930

Ferrule For All 911 Cohline 801-3300 33mm Id With 24mm Opening

Ferrule For Cam Feed Lines. 911 1965-89 930 Cohline 801-1450 14mm Id With 10mm Opening

Ferrule For Oil Lines. 911 Cohline 801-2800 28mm Id With 20mm Opening

Nut For Small Oil Hose

Nuts For Large Oil Hoses For All 911

Straight Nipple For Large Oil Hoses 911

Straight Nipple For Small 911 914-6 Oil Hoses

KN SPORTS AIR FILTER

K&N AIR FILTER CLEANER

Kn Filter Oil 6.5 Oz Aerosol

JR SPORTS AIR FILTER

CLEANING AND SERVICING KIT FOR JR AIR FILTER

INTAKE KIT FOR 911 2.8 RSR + 3.0 SCRS + 911 ST

GUILLOTINE TYPE INJECTION 3.0 RSR COMPLETE KIT MAGNESIUM / 43 MM

SHEAR VALVE 911 RSR ST TYPE 41 MM PAIR FOR 2.0 TO 2.5 LITRE ENGINE

SHEAR VALVE 911 RSR ST TYPE 43 MM PAIR FOR 2.7 TO 3.0 LITRE ENGINE

SHEAR VALVE 911 RSR ST TYPE 46 MM PAIR FOR ENGINE OVER 3.0 LITRES

DUAL AIR FILTER FOR WEBER CARBURETORS PAIR

DOUBLE BOX AIR FILTER FOR WEBER CARBURETTOR ONE

SPORTS AIR FILTER STRAP ONE

KIT OF PLUGS FOR REMOVAL OF AIR PUMP INJECTORS SET OF 6

CARBURETOR INTAKE PIPE PAIR / 40/38 MM

CARBURETOR INTAKE PIPE PAIR / 46/38 MM

CARBURETOR INTAKE PIPE PAIR / 46/41 MM

DOUBLE AIR FILTER FOR PMO CARB PAIR

Porsche Classic Engine Oil. 10w60 1 Liter Can . Ground Shipping Only. 1 LITRES

Q8 FORMULA F1 10W60 ENGINE OIL 1 LITRES

Cylinder Base Gasket .25mm
0.25 MM

CYLINDER BASE GASKET
0.50 MM

CYLINDER BASE GASKET
0.50 MM

Cylinder Base Gasket .25mm
0.25 MM

Red Oil Filter . Purolator Micronic. Pc260 911 964 1972-1994
RED OIL FILTER AS ORIGINALLY MOUNTED

ENGINE OIL DRAIN VALVE
22 x1.5 MM

SET OF 4 REINFORCED OIL RETURN TUBES, 911 65-94 ENHANCED COOLING
SET OF 4

TELESCOPIC ALUMINIUM OIL RETURN TUBE SET OF 4
SET OF 4

TELESCOPIC ALUMINIUM OIL RETURN TUBE, SOLD INDIVIDUALLY, 911 65-98
ONE

O-Ring 911 930 964 993 1965-1998 20,22x3,53n
CENTRAL

O-Ring For O.E. Oil Return Tubes
EXTERIOR

OIL GALLERY
UPPER

OIL GALLERY
LOWER

CSF FRONT ALUMINUM HIGH-PERFORMANCE OIL COOLER 911 STYLE RS 73
61X 13 X 5 CENTIMETRE

ACT RIGHT LUBRICATION HOSE 911 74-83
FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

Cam Feed Line, Right Side. 1983 (late)-1989.
FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

Camshaft Oil Feed Line, Left, . 911 1965-1983
FOR ASSEMBLY WITH MECHANICAL CHAIN IDLER / LEFT

Camshaft Oil Feed Line, Left, 911 1965 (from Eng.#903070)-1983/early.
FOR ASSEMBLY WITH MECHANICAL CHAIN IDLER / LEFT

Camshaft Oil Line 911 1978-86
FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / LEFT

Camshaft Oil Line. 1983 (late)-1989.
FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / LEFT

OIL HOSE
FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

Oil Line To Camshaft Carrier For 911 1978-89
FOR ASSEMBLY WITH HYDRAULIC CHAIN IDLER / RIGHT

Cohline Oil Breather Hose 2620 22mm Price Is Per Meter
SOLD BY THE METRE

GUILLOTINE TYPE INJECTION 3.0 RSR COMPLETE KIT
MAGNESIUM / 43 MM

DUAL AIR FILTER FOR WEBER CARBURETORS
PAIR

DOUBLE BOX AIR FILTER FOR WEBER CARBURETTOR
ONE

SPORTS AIR FILTER STRAP
ONE

KIT OF PLUGS FOR REMOVAL OF AIR PUMP INJECTORS
SET OF 6

CARBURETOR INTAKE PIPE
PAIR / 40/38 MM

CARBURETOR INTAKE PIPE
PAIR / 46/38 MM

CARBURETOR INTAKE PIPE
PAIR / 46/41 MM

DOUBLE AIR FILTER FOR PMO CARB
PAIR

Porsche Classic Engine Oil. 10w60 1 Liter Can . Ground Shipping Only.
1 LITRES

Q8 FORMULA F1 10W60 ENGINE OIL
1 LITRES

ENGINE OIL CLASSIC 10W-60
5 LITRES

GULF 911 OIL 15W50
1 LITRES

GULF 911 OIL 15W50
4 LITRES

Q8 FORMULA F1 10W60 ENGINE OIL
4 LITRES

TAG
1 LITRES

100 Liter Fuel Tank For 911 912 1965-1973
100 LITRES

FUEL TANK
85 LITRES

Fuel Tank, 85 Liter Capacity, Space Saver Type. 911 912e 1974-89
85 LITRES

FUEL HOSE
SOLD BY THE METRE / 3 MM

FUEL HOSE
SOLD BY THE METRE / 4 MM

FUEL HOSE
SOLD BY THE METRE / 7 MM

FUEL HOSE
SOLD BY THE METRE / 8 MM

FUEL HOSE
SOLD BY THE METRE / 9 MM

Chain Sprocket Spacer For Chain Tensioner Update Kit 911 73-89 914-6
FOR ASSEMBLY WITH MECHANICAL CHAIN IDLER

COVER
LEFT

COVER
RIGHT

CHAIN ADJUSTER
LEFT

CHAIN ADJUSTER
RIGHT

WELTMEISTER VALVE COVER GASKET SET
SILICONE

GASKET
SILICONE

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM

HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM

COMPETITION VALVE SPRING KIT
COMPLETE KIT

TITANIUM UPPER VALVE SPRING CUP
ONE

REINFORCED LOWER VALVE SPRING CUP
ONE

Rocker cover 911, For 1968-1989 911, Not Turbo Style. Please Note: Machined Surfaces are SHARP!
NOT VENTILATED / BLACK / BLACK / LOWER

ROCKER COVER INF 911 68-89 UNVENTILATED (LIKE THE OLD ONES)
NOT VENTILATED / LOWER

LEFT SPORTS CAMSHAFT 911 78-94 911 964 / 993 MECHANICAL ROCKER ASSEMBLY
LEFT

RIGHT SPORTS CAMSHAFT 78-94 911 964/ 993 MECHANICAL ROCKER ASSEMBLY
RIGHT

RACING CAMSHAFT
LEFT