Authentic Restoration Parts For Your Porsche ... Since 1957
Here are the step by step instructions for repairing your LCD screen on the HVAC panel of your 986 Boxster or 996.
You can buy the kit here: LCD Kit
Question:
I have a 356A coupe and getting it ready for driving this Spring. I have the brake and clutch pedals out of the car and thought to replace the clutch cable. But, I’m confused as to which cable to order – the online listings like the Porsche PET aren’t too clear. - A. Cunningham, Monroeville, PA.
Answer:
Yes, there continues to be confusion about the cables due to misleading printed catalogs and present on-line entries. Many guys seem to go by the length of the cable when ordering. All old used cables in the car for 20-40 years have stretched, so length isn’t a good identifier but can be a rough guide. By the way, the difference in lengths of new cables is only about 3 inches. So, a better guide is the thread diameters on both ends of the cable. If you disregard the very early cable with the outer casing, you’ll see other three cables all have a different combination of end threads. So the thread diameter is the key to which cable you need.
Take a look at the chart below.
In the chart I added the part number of the German company, Gemo, that supplies these cables to the after-market. In the last several years, Gemo has identified their cables with a red sleeve marked with their part number – a convenient way to lessen the confusion with these cables.
See our website for details for cable end fittings for each model/transmission combination. Also, I recommend application of the Wurth product, HHS-K lubricant, on the moving parts at each cable end.
Regards,
Brad Ripley
Question:
I’m finishing up the rebuild on my 356B Super engine. It’s been a couple of years and just now I’m installing the fuel system. I have several banjo-bolts and can’t figure out which one goes where. Please enlighten me on banjo bolts. - P. Garvey, Concord, MA.
Answer:
Like many guys owning and working on 356s, you probably have a box of nuts, bolts and other fittings including a few banjo bolts. There were many banjos on Porsche engines, so it’s not surprising you have this question. If you are wondering, What’s a banjo bolt? See this video here. Porsche calls these "hollow bolts."
For 356 fuel systems there are only two bolts to worry about. First, for the carburetors (Zenith and Solex), the bolt looks like this photo:
The important dimension is the thread: 12 x 1,25. The length of the bolt is 22,45 and shoulder under the head is 12,00. With many original bolts, the head will be stamped with a “V” which denotes Vergaser, German for carburetor. Part number is 616 100 867 00 .
For fuel pumps, the bolt may look about the same but the thread is 12 x 1,50. Length is 24,00 and shoulder is 12,00. Part number is 900 175 020 01. Bolt looks like this below:
Note, there is no shoulder under the head, although the same sealing washer is used.
The fiber sealing washer for both sides of the banjo (ID 12,12) for both carbs and pump is part number 616 108 423 00. You’ll need seven washers per engine.
Incidentally, for early 356A engines, the 900 175 020 01 bolt is used in the Solex 32 & 40 carbs and also in the early fuel pump.
I hope this sorts out some of those banjo bolts in your Treasure Box of Fittings.
Regards,
Brad Ripley
The 2020 LA Lit and Toy Show was a great success--just sneaking in before much of the world shut down. Here are some images . 
Shop Tour at Callas Rennsport.
Shop Tour at Beverly Hills Car Club.
Visting Wilhoit Restoration is always a treat--packed as usual!
Wilhoit had several 4-Cam Carrera motors on display.
On new stop this year was the Porsche Experience in Carson--lots of eye candy!
Real 917. Off to the side, the engine was getting worked on.
Several lucky "Shop Tour" goers got a ride in a new Taycan at PECLA!
The event itself was awesome--wall to wall crowds, before things. Um. Hit the fan.
We, of course, had our latest wares on display!
Performance parts or Concours details. Always there!
Afterwards...more shop tours!
Emory Motorsports opened their doors for our whole crew!
More images can be seen at Stoddard's Facebook page here:
https://www.facebook.com/StoddardPorscheParts
Or our LA Lit and Toy Show Facebook page here:
https://www.facebook.com/TheLitMeet
Stoddard's 32nd Annual All-Porsche Car Show and Swap Meet was held this past weekend, on June 7-8th. We had vendors from all over the midwest and Canada present and visitors from all over the country here at our Highland Heights Facility. Thankfully, this was one of the nicest weekends that Northern Ohio has seen so far this year.
The Friday night literature and toy meet had some interesting finds.
Like previous years, we served sandwiches and some pretty darn good cookies.
LN Engineering was on display both Friday and Saturday.
The guys from Restoration Design drove down from Canada to show off their "from scratch" Speedster.
Adam Wright showing off his latest acquisition. It was more of an arts and crafts project than a Porsche, but any 356 with a title is worth restoring!
This BT5 looked like a decent driver. It was for sale for $48,000 in the swap area.
Our resident 914 Nerd, Mark Taylor noted that there were at least 9 914s in attendance for the Car Show.
One of our favorite cars was this Bahama Yellow 912. No, it wasn't perfect, but it looked like a nice, honest car in a cool color.
Deborah and Paul Bedford's RHD Speedster was shipped here from Australia to get some work done by Mike Immarino's Aircooled Auto. Oddly enough, this car was once owned by Mike's dad! This car earned Third Place in the Car Show.
Jerry Payto's beautiful 1967 911 is always a treat to look at. It finished Second in the car show.
Terrence Orr's 1962 Twin Grill Roadster was Best In Show!
Jesse Nolan from Across The Pond Restoration accepting the Best In Show award for the Roadster.
Our friends at Nor Cal Treffpunkt has a organized a pair of Swap Meets for this Summer.
Please Meet The Stoddard Stainless Sport Exhaust System for 356 and 912!
A few years ago, we helped the TV Show, "Overhaulin'" build a custom 356 by supplying them with sheetmetal and trim items to complete the project. The Host, Chip Foose, did a lot of custom work on the 356 and our friend Rod Emory chipped in as well. The finished car included a pretty wild exhaust system that we loved.
The exhaust system was engineered at Magnaflow for the TV Show—we then took that original design and adapted it for larger scale production to fit 356A through 356C cars with the included mandrel-bent tubes that slide into the stock bumper outlets. We also created tips so that the all-stainless-steel performance exhaust could be used on a 912, as well as Sport tips for exiting under the bumper on a 356. It's got a great, throaty sound and works well on stock and 1720cc big bore engines.
The exhaust systems are constructed out of 400-series stainless steel with polished straight-through perforated-core mufflers. The design incorporates an X or Cross pipe design to boost torque, which is usually difficult from a packaging perspective on a flat-four engine.
We took extra care to perfect the exhaust note of the system. There is no resonances or drone at speed—just a nice, throaty sound during acceleration. Here's a link of the video of the sound during acceleration HERE. You can also hear the exhast system idling HERE.
Please give us a call at (800) 342-1414 to order or go HERE to order online.
Question:
I have a 1963 356B coupe which needs new front brakes.I’m pretty handy working on cars and want to do the work myself. I see you sell new brake shoes and all the other brake stuff. Tell me what to watch out for with this job. - George B., Cleveland, OH.
Answer:
There are no real mysteries in the Porsche 356 drum brakes. So here’s a few words that should help you out. Obviously, the front drums need the most attention and the drums themselves wear out after all these years. Any cracks in the drum linings are cause to have the drums relined – there are a couple of sources for that service in the US – call me for names. Plus, the Porsche factory has recently manufactured new complete drums. However, usually the drums are good and may only need slight re-surfacing.
Assuming your drums are good, then your major job will be replacing the shoes and wheel cylinders. There are three areas to pay attention to. See photos below of both brake assemblies.
Brake cylinders – two of the cylinders you will receive will go in the upper location and two go in the lower location. Look in the photo of the right-hand assy: The upper cylinder has the adjuster on the left side and the bottom one has the adjustor on the right side.
Brake shoes – all four shoes should be the same design. The new production shoes from Stoddard NLA are modelled after the last and best original version. Previous Porsche versions can be used as well but are not as effective. Check the position of each in the photos.
Look at the shoe in the upper left in the right-hand assy.The thick end goes into the adjuster side of the cylinder and the thin end goes into the non-adjustor side of the lower cylinder.
Some shoes are slightly thicker and/or bent on the end and will bind in the slot. A little filing or slight grinding will take care of that problem. A very slight touch of anti-seize compound at those points will solve any binding.
Springs – carefully note which hole the ends of the springs attach to. Those springs are four of the big springs in your brake hardware kit (the other two are used on the rear brakes). You’ll find that vice-grip type pliers are your best friend to get the ends of these springs into the holes! The other springs are the little coil springs which tension the end caps against the “nails”. Again, there’s no problem if you have the right tool. Buy one like this at Pep Boys which will take the grief out of setting the seats against the springs.
That should get you started on doing your brake job. Give us a call with any questions.
800-438-8119.
Regards,
Brad Ripley
Question:
I have a 356C. This Spring I’m detailing my engine – painting the engine tin and coil and so forth. I bought two tiny rubber plugs but wonder where they go. The part number on my invoice is 539-06-116.
- John C., Sacramento, CA.
Answer:
Good question. The Porsche Parts Catalog and the Porsche Electronic Catalog (PET) just shows those little plugs off to the side of the fan house and no real indication of where they go. Take a look at the photo below. In the background is the fact that the fan housings started out from Volkswagen and were modified by Porsche as the years went by. You can see some metal plugs spot-welded here and there which close up holes used in other applications, i.e., Pre-A and industrial engines.
You will need two of these plugs. Note, one of the plugs will be hidden after the coil and oil filter brackets are installed.
Give us a call with questions any time.
800-438-8119.
Regards,
Brad Ripley
by Cameron Taylor
Demand the best for your vintage Porsche brakes– Stoddard’s new production of quality 356 drum brake shoes. When the 356 was produced, it was equipped with drum brakes, which were pretty normal for the time. These function by expanding the pair of shoes into the inner friction surface of the drum to create friction to stop the car. In 1964, with the introduction of the 356C, Porsche switched to the newer and more modern disc brake system. However, there are many older models still on the road, and as they are performance cars, albeit vintage, braking is still of top importance.
For many years remanufactured brake shoes were the only choice for the 356 owner. Just as it sounds, each shoe is stripped of its friction material and new material is reapplied. Now there is an option for higher quality and better performance. For the first time in decades, newly manufactured 356 brake shoes are available for sale. These new shoes are designed to fit perfectly and are a great value.
Stoddard brake shoes are made here in America using the highest quality components. Each new backing plate is laser cut and then assembled using state of the art computer-controlled TIG welding. The backing plate ends are finished with proper coining to better fit the cylinders. The friction material is bonded to our plates with asbestos free lining applied by the largest manufacture of brake shoes here in the United States.
An axle set of our brake shoes (4) is a great value and will fit 356, 356A, and 356B models. There is no core charge as we use all new material.
Our backing plate components are made from high quality steel
Our shoes are made using state of the art TIG welding for optimum fit and precision.
