Stoddard

Authentic Restoration Parts For Your Porsche ... Since 1957

  • Order Online or Call:
  • East Coast:(800) ­342 ­1414
  • West Coast:(800) ­438 ­8119
  • International: (440) 869 9890

Solex Carburetors 40 PII-4

Solex Carburetors 40 PII-4

37 Item(s)

per page

Grid  List 

Set Ascending Direction
  1. 616-108-905-00 Cylinder Head to Intake Manifold Gasket. 2 required, fits Solex 40PII-4.  Only for Super 90, SC, and 912 models. 61610890500

    616-108-905-00 Cylinder Head to Intake Manifold Gasket. 2 required, fits Solex 40PII-4. Only for Super 90, SC, and 912 models. 61610890500

    $11.71
    Manifold to head gasket, 2 required, fits Solex 40PII-4. Only for Super 90, SC, and 912 models. Learn More
  2. NLA-108-902-02-X Solex 40PII Single Solid Shaft Carburetor (Pair) Rebuilt. Sold on Exchange Basis. Fits Super 90, 356SC and Early 912 up through 1967.

    NLA-108-902-02-X Solex 40PII Single Solid Shaft Carburetor (Pair) Rebuilt. Sold on Exchange Basis. Fits Super 90, 356SC and Early 912 up through 1967.

    $1,334.50
    NLA-108-902-02-X Solex 40PII Single Shaft Carburetor (Pair) Rebuilt. Sold on Exchange Basis. Fits Super 90, 356SC and Early 912 up through 1967. Learn More
  3. 616-108-393-00 Metal Carb Spacer Solex  40 PII-4 Single Shaft Fits 911/912 55-65 61610839300

    616-108-393-00 Metal Carb Spacer Solex 40 PII-4 Single Shaft Fits 911/912 55-65 61610839300

    $37.23
    Metal Carb Spacer Solex 40 PII-4 Single Shaft Fits 911/912 55-65 Learn More
  4. T80-800-MAN Manometer Fuel Tuning Device for Synchronizing Multiple Carburetors or Throttle Bodies (MFI)

    T80-800-MAN Manometer Fuel Tuning Device for Synchronizing Multiple Carburetors or Throttle Bodies (MFI)

    $201.25
    Manometer
    During the 1950's, 60's and 70's, Porsche required each of their Dealer Service Departments to have this tool for tuning carburetor and mechanical fuel injection engines. Porsche realized that this was the only tool which would produce the accuracy required to calibrate air volume with adjustable throttle plates and have the sensitivity to calibrate air bypass screws for non-adjustable throttle plates. If each cylinder doesn't have exactly the same air intake volume, the horsepower produced by each cylinder will vary, causing the loss of power and shortened engine life. This is the only tool that is 100% accurate, and works with all types of Porsche, PMO, and side-draft/up-draft carburetors. Learn More
  5. 616-108-901-02 Solex Intake Manifold to Carburetor Gasket 61610890102

    616-108-901-02 Solex Intake Manifold to Carburetor Gasket 61610890102

    $1.82
    Gasket on either side of carburetor to manifold spacer, 8 required, fits Solex 40PII- Learn More
  6. 616-108-390-00 Solex Carburetor to Manifold Spacer fits Solex 40PII-4. 61610839000

    616-108-390-00 Solex Carburetor to Manifold Spacer fits Solex 40PII-4. 61610839000

    $10.67
    Carburetor to manifold spacer, fits Solex 40PII-4. Learn More
  7. 616-100-867-00 Late Fuel Fitting Banjo Bolt 61610086700
    Diagram # multiple use # 7 For 912

    616-100-867-00 Late Fuel Fitting Banjo Bolt 61610086700

    $24.04
    Hollow bolt at carburetor, 2 req'd. Learn More
  8. 616-100-912-07 Throttle Shaft For Solex Carburetor 40 P11-4 Split Shaft. Fits 356 1963-65 &  911/912 1965-69  61610091207

    616-100-912-07 Throttle Shaft For Solex Carburetor 40 P11-4 Split Shaft. Fits 356 1963-65 & 911/912 1965-69 61610091207

    $47.01
    616-100-912-07 Throttle Shaft For Solex Carburetor 40 P11-4 Split Shaft. Fits 356 1963-65 & 911/912 1965-69 Learn More
  9. 616-100-944-00   Screen Strainer Fits 356 Solex 40 PII-4 Solid Shaft Fits 356 911 / 912 1965-76 61610094400

    616-100-944-00 Screen Strainer Fits 356 Solex 40 PII-4 Solid Shaft Fits 356 911 / 912 1965-76 61610094400

    $4.71
    Screen Strainer Fits 356 Solex 40 PII-4 Solid Shaft Fits 356 911 / 912 1965-76 Learn More
  10. T80-790-001 Solex Fuel Float Level Gauge

    T80-790-001 Solex Fuel Float Level Gauge

    $10.36
    Solex Fuel Float Level Gauge Note; Do not use with high ethanol content fuel. This will cause damage to the plastic vial. Learn More
  11. NLA-08-315 Velocity stacks for Solex 40 PII-4 carbs 356 Carrera (pair) Replaces 54708315 61608315

    NLA-08-315 Velocity stacks for Solex 40 PII-4 carbs 356 Carrera (pair) Replaces 54708315 61608315

    $702.41
    Velocity stacks for Solex 40 P11 carbs. Used on 356 Carrera. Perfect recreation of the optional Factory Carrera intakes. Use in place of stock air cleaners to gain a few extra HP for autocross and time trials. Steel and nicely cad plated. 1 pair per car. Learn More
  12. 901-100-915-01 Sealing Ring For Carburetor Assembly Split Shaft Solex 40 PII-4 Fits 356 1960-65 & 911/912 1965-69 90110091501

    901-100-915-01 Sealing Ring For Carburetor Assembly Split Shaft Solex 40 PII-4 Fits 356 1960-65 & 911/912 1965-69 90110091501

    $2.61
    Sealing Ring For Carburetor Assembly Split Shaft Solex PII-40 Fits 356 60-65 Learn More
  13. 616-100-925-00 Hex Nut Pump Control Rod Fits 356 40PII-40  Fits 356 911 1965-76 9120 930  61610092500
    Diagram # 79

    616-100-925-00 Hex Nut Pump Control Rod Fits 356 40PII-40 Fits 356 911 1965-76 9120 930 61610092500

    $1.24
    Hex Nut Pump Control Rod Fits 356 40PII-40 Fits 356 911 1965-76 Learn More
  14. 616-100-961-00 Pump Spring 40 PII-4 Single Shaft 61610096100
    Diagram # 74

    616-100-961-00 Pump Spring 40 PII-4 Single Shaft 61610096100

    $3.02
    Pump spring for Solex 40 P 11-4 carburetor. Learn More
  15. PCG-100-951-00 Carburetor Diaphragm for Solex 40PII-4, for 356 and 912. PCG10095100
    Diagram # 64

    PCG-100-951-00 Carburetor Diaphragm for Solex 40PII-4, for 356 and 912. PCG10095100

    $22.56
    Carburetor Diaphragm for Solex 40PII, for 356 and 912. Learn More
  16. 999-522-003-02  Carburetor Return Spring  Solex 40 PII-4 99952200302
    Diagram # 59

    999-522-003-02 Carburetor Return Spring Solex 40 PII-4 99952200302

    $4.35
    Carburetor Return Spring Solex 40 PII-4, 356B Super 90, 356 SC, 1960-1965, 912 1965-1969 Learn More
  17. NLA-108-106-02 Air Cleaner Bolt Set 6mm x 95mm 10-piece set. Fits Solex 40PII as fitted to 356 Super 90 And SC 1960-65 912 1965-69 NOS Kamax / Karro with Correct Plating Replaces 61610810602
  18. 616-108-423-00 12mm x 16mm Fiber Washer for banjo bolts, Fits 356/912 with Zenith and Solex carburetors 61610842300
    Diagram # Multiple Use # 8 For 912

    616-108-423-00 12mm x 16mm Fiber Washer for banjo bolts, Fits 356/912 with Zenith and Solex carburetors 61610842300

    $0.88
    Washer, 8 required, (Early 356, 356A w/Solex carburetors), 6 required, (356A w/Zenith carburetors), 4 required, (356B, 356C, 912). 12mm x 16mm Fiber Washer for banjo bolts, Fits 356/912 with Zenith and Solex carburetors 61610842300 Learn More
  19. NLA-100-867-00 Hollow Bolt For Solex 40 PII-4 Carburetor Fits 356 Replaces 61610086700
    Diagram # 53

    NLA-100-867-00 Hollow Bolt For Solex 40 PII-4 Carburetor Fits 356 Replaces 61610086700

    $19.58
    Hollow Bolt For Solex PII40 Carburetor Fits 356 Learn More
  20. 616-100-969-00  Securing Carb Screw 32 NDIX Fits 356 911 / 912  65-76 61610096900
    Diagram # multiple use

    616-100-969-00 Securing Carb Screw 32 NDIX Fits 356 911 / 912 65-76 61610096900

    $1.12
    Securing Carb Screw 32 NDIX Fits 356 911 / 912 65-76 Learn More
  21. 692-100-968-00 Gasket for Pump Injector 40 PII Single Shaft  69210096800
    Diagram # 49

    692-100-968-00 Gasket for Pump Injector 40 PII Single Shaft 69210096800

    $1.37
    Gasket for underneath the pump injector. Fits Solex. 40 P11-4 Single Shaft. 2 required per car. Learn More
  22. 616-100-980-00 Carb Tube  Right Hand Solex 40-PII-4  For  356  60-65    911/912   60-65 61610098000
    Diagram # 48

    616-100-980-00 Carb Tube Right Hand Solex 40-PII-4 For 356 60-65 911/912 60-65 61610098000

    $29.89
    Carb Tube Right Hand Solex 40-PII-4 For 356 60-65 911/912 60-65 Learn More
  23. 616-100-971-01 Carb Valve Fits 356 1960-65 911 1965-69 912 61610097101
    Diagram # 46

    616-100-971-01 Carb Valve Fits 356 1960-65 911 1965-69 912 61610097101

    $26.28
    Carb Valve Fits 356 1960-65 911 1965-69 912 Learn More
  24. 616-100-941-00 Adjusting Screw Fits 356 Solex Fits 356 911 / 912 1965-76 40PII-4 61610094100
    Diagram # 44

    616-100-941-00 Adjusting Screw Fits 356 Solex Fits 356 911 / 912 1965-76 40PII-4 61610094100

    $1.49
    Adjusting Screw Fits 356 Solex Fits 356 911 / 912 1965-76 Learn More
  25. 616-100-915-00 Seal Ring For Main Jet Carrier Solex  40 PII-4 Fits 356 55-65 61610091500
    Diagram # 22

    616-100-915-00 Seal Ring For Main Jet Carrier Solex 40 PII-4 Fits 356 55-65 61610091500

    $0.31
    Seal Ring For Main Jet Carrier Solex 40 PII 4 Fits 356 55-65 Learn More
  26. 616-100-914-01  Main Jet Carrier For  Solex  40 PII-4 Carburetor  356 912 61610091401
    Diagram # 21

    616-100-914-01 Main Jet Carrier For Solex 40 PII-4 Carburetor 356 912 61610091401

    $8.47
    Main Jet Carrier For Solex 40 P II Carburetor 356 912 Learn More
  27. 616-100-927-01 Adjusting Screw Fits 356 Solex PII-4 Fits 356 911 / 912 1965-76 61610092701
    Diagram # 19

    616-100-927-01 Adjusting Screw Fits 356 Solex PII-4 Fits 356 911 / 912 1965-76 61610092701

    $14.94
    Adjusting Screw Fits 356 Solex PII-4 Learn More
  28. 616-100-937-00 9mm x 13mm Red Fiber Washer under pump jet . 2 required for 356 cars with Solex 40P11 carbs. 61610093700
    Diagram # 17

    616-100-937-00 9mm x 13mm Red Fiber Washer under pump jet . 2 required for 356 cars with Solex 40P11 carbs. 61610093700

    $0.49
    9mm x 13mm Red Fiber Washer under pump jet . 2 required for 356 cars with Solex 40P11 carbs. 61610093700 Learn More
  29. 616-100-814-00 Carb Spring On Thrust Block  Fits 356 Zenith 32 NDIX 61610081400
    Diagram # 68

    616-100-814-00 Carb Spring On Thrust Block Fits 356 Zenith 32 NDIX 61610081400

    $3.21
    Carb Spring On Thrust Block Fits 356 Zenith 32 NDIX Learn More
  30. 616-100-923-00 SCREW 61610092300
    Diagram # 14

    616-100-923-00 SCREW 61610092300

    $2.06
    SCREW Learn More
  31. 616-100-934-00 Carburetor Screw - Solex PBI 61610093400
    Diagram # 14/60

    616-100-934-00 Carburetor Screw - Solex PBI 61610093400

    $1.59
    Screw for Solex 32 PBI Learn More
  32. 616-100-913-00 Hex Nut For Throttle Spindle  32 PBIC  2 Required fits 356 911 1965-76 912 930  61610091300
    Diagram # 12

    616-100-913-00 Hex Nut For Throttle Spindle 32 PBIC 2 Required fits 356 911 1965-76 912 930 61610091300

    $2.80
    Hex Nut For Throttle Spindle 32 PBIC 2 Required fits 356 911 1965-76 912 930 Learn More
  33. 616-100-977-00 Left Throttle Lever - Solex 40PII-4 61610097700
    Diagram # 6

    616-100-977-00 Left Throttle Lever - Solex 40PII-4 61610097700

    $29.89
    Left side throttle lever with thrust block. Fits Solex 40PII-4 Learn More
  34. 616-100-912-02 Throttle Shaft for Solex 40P11 61610091202
    Diagram # 2

    616-100-912-02 Throttle Shaft for Solex 40P11 61610091202

    $102.45
    Throttle Shaft for Solex 40P11 Learn More
  35. 616-108-902-03 Solex 40PII Split Shaft Carburetor Rebuild Kit 61610890203

    616-108-902-03 Solex 40PII Split Shaft Carburetor Rebuild Kit 61610890203

    $29.99
    Solex Carburetor Rebuild Kit, complete, 2 required, fits Solex 40PII-4 with split shaft. Learn More
  36. 616-108-902-02 Solex 40PII Single Shaft Carburetor Rebuild Kit. Requires 2x 616-108-901-02 Base Gaskets. 61610890202

    616-108-902-02 Solex 40PII Single Shaft Carburetor Rebuild Kit. Requires 2x 616-108-901-02 Base Gaskets. 61610890202

    $28.77
    Solex Carburetor Rebuild Kit, complete, 2 required, fits Solex 40PII-4 with single shaft. You should order 2x additional base gaskets per kit as it only comes with the ones above the spacer (616-108-901-02) Learn More
  37. NLA-108-200-00 Performance Air Filters (pair) for Solex 40 for 356 Super 90 SC and 912 Replaces 61610820000

    NLA-108-200-00 Performance Air Filters (pair) for Solex 40 for 356 Super 90 SC and 912 Replaces 61610820000

    $938.40
    New and improved reproduction of the KNECHT air filters for all Solex 40 carburetors. Used on Super 90 - SC - 912. Fixed filter element, it can be cleaned with cleaning solvent. 35 mm velocity stacks inside. Original filter do not have any stacks. Includes screws and washer. Cover and bottom plate and wire mesh in alloy. Power increase 2-4 HP, tested by John Willhoit. Learn More

37 Item(s)

per page

Grid  List 

Set Ascending Direction